ECCB OUTDOOR Outer Banks Value Line Adirondack Chair Assembly Instructions

Download this manual

Important

Please Read All Instructions Carefully Before Assembling This Product

• Inspect all parts to make sure that nothing is broken or missing. If something is broken

or missing, please contact our service department at support@eccboutdoor.com.

• The chair must be completely assembled before attempting to use it. Failure to do so

could result in damage to the chair or the user.

• Use proper safety gear and follow appropriate safety precautions when assembling this product.

• Important - Do not overtighten the screws.

• Only hand tools should be used for assembly. Do not use power tools.

• ECCB Outdoor will not be liable for any injury or damage resulting

from improper assembly and/or use of this product.

• Failure to follow all instructions will result in the product warranty being voided.

ECCB

O U T D O O R

966 Perry Highway, Mercer, PA 16137 • Phone (800) 687-5086

ECCBOutdoor.com

Assembly Instructions

Outer Banks Value Line Adirondack Chair

Congratulations on the purchase of your

new Outer Banks Value Line Poly Lumber

Adirondack Chair. You will soon be sitting

back and relaxing in the comfort of this

classic chair when you follow these

easy step-by-step instructions.

Need help?

Do you have a question about the Outer Banks Value Line Adirondack Chair and is the answer not in the manual?

Page 1 • Important - Do not overtighten the screws. • Only hand tools should be used for assembly. Do not use power tools. • ECCB Outdoor will not be liable for any injury or damage resulting from improper assembly and/or use of this product.
Page 2 Parts Make sure you have received everything. If anything is missing or damaged, please contact our service department at support@eccboutdoor.com. Back - 1 pc Seat - 1 pc Arms - 2 pcs Brace Arms will be folded in box - unfold for assembly Hardware - Shown at Actual Size Lag Screws - 10 pcs...
Page 3 Let’s Get Started! Step 1 - Attach the Arms to the Seat • Attach the arms (C) to the seat (B) using a bolt (F) on the outside and a washer (G) and nut (H) on the inside of each hole. You will need the open-ended wrench and Allen wrench for this step. •...
Page 4 Step 3 - Attach the Front Brace to the Legs • Attach the front brace (D) by placing it into the inner leg notches at the front of the chair. Secure using a lag screw (E) in each hole of the bar. There is one hole per side. The front brace will be snug at first.