Download Print this page

Scion Anapaya XL-Type Supermicro Quick Start Manual

Appliance

Download this manual

Quick Start Guide

Appliance XL-Type

Supermicro

Version 1.1

Need help?

Do you have a question about the Anapaya XL-Type Supermicro and is the answer not in the manual?

Page 1 Quick Start Guide Appliance XL-Type Supermicro Version 1.1...
Page 2 Quick Start Guide Appliance XL-Type Supermicro Welcome to the SCION world! Here you can find initial connection instructions for your Anapaya XL-type device to set it up as an EDGE appliance. When installing the appliance as a CORE appliance you may need to change the port assignment. Once the device is unpacked and...
Page 3 Quick Start Guide Accessing the device via SSH using the DHCP assigned IP address or the static IP assigned to port 4 i.e. . Make sure that on your computer you statically ssh anapaya@169.254.1.1 configure the IP address on the network interface the cable leading to the 169.254.1.2/30 Appliance is connected to.
Page 4: Troubleshooting
Quick Start Guide Interface mapping Interface Name Port Nr. on Device Port Usage Port Type eno1 BMC & OS Management RJ45 1G eno2 Unassigned RJ45 1G eno3 Unassigned RJ45 1G eno4 Unassigned RJ45 1G eno5 Default RJ45 LAN interface RJ45 10G eno6 Default RJ45 WAN interface RJ45 10G...
Page 5 Quick Start Guide The NIC breakout mode is set in the BIOS at: Advanced -> Intel(R) Ethernet Network Adapter E810-2c-Q2 - MAC:ADDRESS:OF:THE:NIC -> Device Level Configuration -> Port Option configuration -> Port Option Set it to option 0: 1x100G  Warning If the NIC was already set to some sort of breakout only the first interface of said breakout will show the “Device Level Configuration”...