Page 1
Les produits SD-250 doivent être installés par un intégrateur de système audio professionnel. SD-250 products must be installed by a professional audio installer/contractor. For safety and for Pour des raisons de sécurité et de rendement audio optimal, l'installateur doit suivre toutes les optimum audio performance, installer must follow all directions issued by SoundTube for the SD-250.
Page 2
SD-250 Install Instructions For: SD-250. Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Page 3
Euroblock, or high external 12v-32v DC trigger. on the front of the SD-250. wired Euroblock connector, level Euroblock on the front of To enable, move the or via barrel connector with the unit.
Page 4
SD-250 Install Instructions For: SD-250. FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the SD-250 and is the answer not in the manual?
Questions and answers