Victor METRO VSRP-800 Quick Setup Manual

BASIC SETUP OF THE VSRP-800 SUITCASE TURNTABLE:
1. Connect the power adaptor to a nearby AC outlet.
2. Turn on the unit by turning the POWER/VOL knob and the power LED
indicator lights up. Your system is now ready to play your music.
Please refer to the Operations section of this manual for details.
PREPARE TURNTABLE FOR PLAYING RECORDS
1. Remove cap protecting stylus.
2. Remove twist tie used to secure the Tone Arm in place.
CONNECT BLUETOOTH® IN
1. Switch the knob to Bluetooth® mode. A blue LED will begin flashing and
a voice indicates the turntable is in pairing mode.
2. Search for the turntable in the list of Bluetooth® devices named
"VICTOR VSRP-800" and connect.
3. A chime and a steady blue LED light will indicate you have paired with
the turntable successfully.
CONNECT BLUETOOTH® OUT
1. Turn on pairing mode on your Bluetooth® speaker.
2. Turn the Bluetooth® knob to the "BT Out" position on the turntable. The
LED light flashes to indicate the device is searching for an available
Bluetooth® speaker.
3. When the turntable connects to the Bluetooth® speaker, the LED light
stays lit. After the speaker is paired successfully, turntable audio signal
can be transmitted.
4. Adjust the volume on your unit and device to desired level.
*This product has been manufactured and sold under the responsibility of NAXA ELECTRONICS INC. VICTOR and the DOG & GRAMOPHONE
logo are trademarks used under license by NAXA ELECTRONICS INC. Further information at www.victor-brand.com. All other products,
services, companies, trademarks, trade or product names and logos referenced herein are the property of their respective owners.
READ THE ENTIRE USER MANUAL FOR COMPLETE UNDERSTANDING OF THE PRODUCT'S OPERATION
QUICK SET UP GUIDE
METRO
VSRP-800
Dual Bluetooth® Suitcase Turntable