Download Print this page

Genius W POINTER How To Use

How to use the remote:

Insert two AAA batteries in the RF Wireless pointer.

Plug the receiver unit into any USB port.

Your operation system will start to setup the receiver unit automatically.

And the information below will display on your computer.

In the Win98/Me operation system, just follow the dialog boxes on your screen.

During the installation process, Windows may ask you to put the Win98 CD into the

CD-ROM.

When the installation process is completed; you can use the wireless pointer.

1. If the pointer is not working or there is interference with another pointer:

1-1 Press the M-key and Enter (wheel) together for at least 5 seconds

(The M-key green LED will flash and change to a new ID).

1-2. Use a paper clip to press the receiver ID Change button

(Wait a moment to learn the new ID).

English

Table of Contents

Do you have a question about the W POINTER and is the answer not in the manual?

Page 1 And the information below will display on your computer. In the Win98/Me operation system, just follow the dialog boxes on your screen. During the installation process, Windows may ask you to put the Win98 CD into the CD-ROM. When the installation process is completed; you can use the wireless pointer.
Page 2 M-Key 2. If you changed the ID before, remove the batteries or if the pointer does not work, repeat steps 1-1 to 1-2. 3. If the pointer has interference with another pointer or any other wireless frequency, just change the direction of the receiver.
Page 3 Volume down Mute Y = Yes, N - No PS: In Windows 98 SE and Win 2000, you need to update the Media player AP from the Microsoft website, then items (2-5) work fine but the Power key will not work.

Pointer