Page 1
Shut O - “Z” Swivel Relief valve Hose Straight Swivel Safety First! Use only Genuine Dualco Parts. Contact Dualco for repair, or rebuilding procedures. 8404 Brani Houston, Texas 77061 713-644-1164 • FAX 713-644-7761 www.dualco-inc.com Producing Professional lubrication products since 1960. Products are made and assembled in the USA.
Page 2
¼ turn, releasing pressure from the Giant Part 2. Loading Button Head Coupler. Each new DUALCO Injection Gun is ready to use, following this 12. Remove the Giant Button Head Coupler from tting and procedure: turn the Shut O -Relief valve clockwise one ¼ turn.
Page 3
A routine should be established to keep the Pump as free from • Be sure to contact DUALCO if there is ever an operational dirt as possible. All unused couplers must be sealed with thread problem, or if there are any questions.
Read complete instructions Be sure the Release Valve before using this Gun. Pedal is locked in position Before tipping. 1. Start by tipping the 11725 on its end. Foot Pedal 2. Remove Cap Turn Counter-clockwise. Use Piston Return Tube / Cap Wrench...
Need help?
Do you have a question about the 11725 and is the answer not in the manual?
Questions and answers