1. Manuals
  2. Brands
  3. QABA Manuals
  4. Motorized Toy Car
  5. SX2318(24V)
  6. Assembly manual

QABA SX2318(24V) Assembly Manual

Hide thumbs

Advertisement

Table of Contents

IN240300294V01_US
370-310V80
Please read the manual before using the product. The manual and carton contain
important information, please keep them properly for later references. If failure to follow
the instruction in the manual, it might be dangerous for your child.
In order to improve the product and quality, we may change the parts of structure,
appearance, packing method, assembly method and function of the product without
any notice. When there is any difference between the manual and the product, please
subject to the actual product. We are sorry for any inconvenience.
Products should be assembled by an adult. Protective equipment
should be worn. Not to be used in traffic. Not suitable for children
under 3 years. Choking hazard- small parts. In unassembled
state, contains potentially hazardous small parts. Please keep
out of the reach of small children. Pay attention to the potential
hazards of using the toy in areas other than private grounds.
The assembly manual of
battery operated car
Model:SX2318(24V)
Executive standard:
ASTM F963
EN71-1
EN71-2
EN71-3
EN62115

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SX2318(24V) and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for QABA SX2318(24V)

Summary of Contents for QABA SX2318(24V)

  • Page 1 The assembly manual of battery operated car Model:SX2318(24V) Executive standard: IN240300294V01_US EN71-1 370-310V80 EN71-2 EN71-3 EN62115 ASTM F963 Please read the manual before using the product. The manual and carton contain important information, please keep them properly for later references. If failure to follow the instruction in the manual, it might be dangerous for your child.
  • Page 2 Parts Parts PICTURE PICTURE Name Name Steering Car Body ① ② wheel Front ③ ④ Seat guard ⑤ ⑥ Backrest Wheel cover ⑦ ⑧ Front wheel Rear wheel ⑨ ⑩ Rear axle Front axle Steering Charger axle Remote Wrench control User manual...
  • Page 3 Needle-nose pliers (Not included)

  • Page 4: Product Specifications

    Disclaimer: The pictures in this instruction are for assembly reference only. Please refer to the actual product. Warning: This product is not the vehicle for transportation, it should be used under adult guidance. Parents should ensure that children have taken the safety measures before use. The toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third party.
  • Page 5 Assembly instruction ● Car assembling should be done by the adults. ● Take care of small parts. To avoid choking hazard, keep children away while assembling. Children under 36 months are prohibited to use. ● Please count all the parts carefully before assembling and dispose the plastic bag properly.
  • Page 6 3. Front axle assembly Using the wrench ⓮, loosen two nuts from front axle ❿, then remove two M8 washers, and set them aside for later use. Place front axle ❿ as shown in the picture, insert it into two holes 【 A】 on square tube, insert the M8 washers, using the wrench ⓮, fix the nuts from bottom.
  • Page 7 Using the wrench ⓮, loosen two nuts from the rear axle ❾, then 5.Motor and rear axle assembly remove two M10 washers as shown in picture (a), set them aside for Pass the rear axle ❾ through the holes on motors and car body. later use.
  • Page 8 7.Front guard assembly Insert front guard ❸ into the front plastic part 【B】 on car body, attach the top of front guard 【 C】 with steering fixing rod. 【C】 steering fixing rod 【B】 8. Steering axle assembly Remove a washer and a cotter pin from the hook 【 D】 on steering axle ⓫.
  • Page 9 9. Steering wheel assembly Using a Phillips screwdriver, remove a screw and a nut from steering wheel ❷. Align the hole on steering wheel ❷ with the hole at the top of steering axle ⓫, using a Phillips screwdriver, fix them with the screw and the nut.
  • Page 10 11. Seat assembly Attach the seat ❹ with the car body. ❹ There are two M4*16 screws on the backrest ❺. Tilt the backrest ❺ forward, insert the hole on backrest ❺ into the hook on rear handrail trim. Using a Phillips screwdriver, fix the backrest ❺ to the car boy with two pieces M4*16 screws.

  • Page 11: Security Warning

    FUSE This car has a auto-reset fuse, if the car stops suddenly during driving, it is mainly caused by instantaneous current exceeds ,which makes the fuse to trip. Then just stop operating for about 8 seconds, and this fuse can be reset. Then turn on the power switch again.In order to avoid the fuse tripping and cutting off power supply, please pay attention to the following matters.
  • Page 12 USAGE DIRECTION 1. Before using it, make sure that all the following works are done. ●Step described in accordance with the instructions to complete the installation of the car, the battery plug-in has been connected, the power supply has been switched on. ●Make sure that all the positions which need the screws are fixed tightly.
  • Page 13 Big memory Electric capacity display Short press: Pause Short press: Horn Long press: mode Long press: volume down Short press: Music Long press: volume up Remote control instruction Note: Match the remote Speed indicator control with car Stop Forward according to the stpes Right ①...
  • Page 14 Press the "S" key to set the speed, a light is low, two lights for medium-speed, three lights for high-speed,the car back with only medium-speed Press the "P" key to keep the brakes, the indicator full flash, press the brake button again to lift the brake. How to insert batteries: Use screwdriver to loosen the screw on the back of the remote control, open the battery cover, and install two AAA1.5V alkaline batteries according to the diagram (Batteries are...
  • Page 15 1.Insert the charger into the charging hole (The car can’t be operated during charging.) 2.Plug the charger into an electrical outlet. WARNING: 1 The toy is to be assembled by an adult. In unassembled state, it contains potentially hazardous sharp points & small parts, so please keep out of baby's reach.

  • Page 16: Maintenance And Service

    MAINTENANCE AND SERVICE 1, Before use, parents should check whether all parts like batteries, charger, wires, plug, outer body and other parts are in good condition, check whether the screws are loose and whether there are potential safety hazards. Any damaged parts founded should be repaired before using.

  • Page 17: Troubleshooting

    TROUBLESHOOTING If “power” switch is in OFF position If the fuse is not functioning properly Car does not If the battery is not connected, check the red and black wires. move or power on If the charger is plugged in, car will not power on. Unplug charger. If the hand accelerator is not functioning properly If the wheels stuck and cannot move If the battery is not fully charged.
  • Page 20 WARNING: This toy contains batteries that are non-replaceable. A recommendation for adult supervision of young children. WARNING: To reduce risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines of steps, swimming pools or other bodies of water, always wear shoes, and never allow more than 1 rider.

Table of Contents