Download Print this page

Kontax Nano Hive Operation And Maintenance Instruction

Download this manual

Nano Hive Operation And Maintenance Instructions

SAFETY NOTICE:

•

Make sure you have a suitable fire

extinguisher to hand in case of emergencies.

•

Never leave a running engine or naked

flame unattended.

•

All parts of the engine will be very hot while

in operation and will take time to cool down

after running.

•

Make sure children are fully supervised.

•

Ensure burner is extinguished after use.

Nano Hive operation instructions page 1 of 5

Need help?

Do you have a question about the Nano Hive and is the answer not in the manual?

Page 1 Nano Hive operation instructions page 1 of 5 Nano Hive Operation And Maintenance Instructions SAFETY NOTICE: • Make sure you have a suitable fire extinguisher to hand in case of emergencies. • Never leave a running engine or naked flame unattended.
Page 2 Nano Hive operation instructions page 2 of 5 If the top end of the wick is frayed you will need to burn off the loose fibres, allow to cool, and then roll the end into a blunt point. ONLY EVER PERFORM THIS STEP ON DRY WICK, NEVER ON WICK THAT HAS BEEN SOAKED IN FUEL.
Page 3 Nano Hive operation instructions page 3 of 5 The engine uses Methylated Spirits or Denatured Alcohol as fuel. Make sure you have a suitable fire extinguisher to hand in case of emergencies. Never leave a running Remove the burner cap from the engine or naked flame unattended.
Page 4 Nano Hive operation instructions page 4 of 5 MAINTENANCE AND OILING The Nano Hive engine is a relatively simple design with few moving parts and should not need oiling under normal circumstances. 1 drop only on surface But if after several hours of running the...
Page 5 Nano Hive assembly instructions page 5 of 5 Our workshop is located in the Thames Valley, United Kingdom and is staffed by a skilled team of 9 designers, machinists and assemblers. We have 4 CNC mills, 3 CNC lathes and 3 CNC mill-turn centres.