(D Espana
Declaration de conformidad con normas
El que suscribe, en nombre y representacibn de:
Business Unit Portable Audio, Division of Philips
China Hong Kong Group Company Ltd.
declara, bajo su propia responsabilidad, que el
equipo:
CD Radiocasete
fabricado por:
BUPA Hong Kong
en:
Far East
marca:
Philips
modelo:
AZ 8049
objeto de esta declaracibn, cumple con la normativa
siguiente: Reglamento sobre Perturbaciones Radio-
elbctricas, Real Decreto 138/1989, Anexo V.
Hecho en:
Hong Kong, 01*04-1995
iA<y
Nombre:
C.S. Lau
Cargo:
Quality Manager
IMPORTANT NOTES FOR USERS IN THE U.K.
[Thts^pparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of
plug proceed as follows:
• .Remove fuse cover and fuse.
• Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
• Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is
i used, the fuse at the distribution board should not be greater than 5 Amp.
Note: The severed plug must be disposed to avoid a possible shock hazard should it be inserted
into a 13 Amp socket elsewhere.
T^evvires in the mains tead are coloured with the following code: blue = neutral (N), brown =
A^these colours may not correspond with the colour markings identifying the terminals in your
plug, proceed as follows:
Connect the blue wire to the terminal marked N or coloured black.
Connect the brown wire to the terminal marked L or coloured red.
_
Do not connect either wire to the earth terminal in the plug, marked E (or ±) or coloured green
(or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of
the lead - not simply over the two wires.
Copyright in the U.K.:
Recording and playback of material may require consent. See Copyright
Act 1956 and The Performer's Protection Acts 1958 to 1972.
2
Need help?
Do you have a question about the AZ 8049 and is the answer not in the manual?