Advertisement
Quick Links
Laptop Tray
COMPONENT CHECKLIST
A
Laptop Tray
(x1)
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! The manufacturer accepts no responsibility for incorrect installation.
! This product is not suitable for outdoor use or mobile applications.
! Do not over-tighten screws and adjustment points on product.
! Periodic adjustment to counterbalance and tilt tension may be required.
! VESA mounted accessories (such as mini PC brackets and mounts), offset VESA locations, and unevenly weighted monitors
(relative to the center of the VESA mounting interface) exert additional leverage that can exceed the capacity of the mount
even though the monitor weight may be within the stated range. Please contact Atdec if you would like further information.
Hook-and-Loop
Fasteners
B
Tray
Screw
Counterweight
M4x12mm
(x1)
Installation Guide
C
REQUIRED TOOLS
• Phillips Head Screwdriver
(x4)
CAPACITY
1-7kg
(2.2-15.4lb)
D
Monitor weight should be within the
(x1)
weight range of all modular elements
that make up the complete monitor
mounting solution.
AWM-N
AWM-N Page 1 of 4
Advertisement
Related Manuals for Atdec AWM-N
Summary of Contents for Atdec AWM-N
- Page 1 (relative to the center of the VESA mounting interface) exert additional leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range. Please contact Atdec if you would like further information.
- Page 2 3. Attach VESA head to Laptop Tray 3.1 Attach VESA head to the Laptop Tray. NOTE: VESA head and (4x) mounting screws are supplied with the monitor arm. Atdec logo should be facing top of tray (see arrow). AWM-N Page 2 of 4...
- Page 3 5.2 (OPTIONAL) To increase stability, apply the supplied self adhesive Hook-and-Loop fasteners. 6. Cable management 6.1 (OPTIONAL) Cables can be clipped into the underside of the tray before continuing to the cable management of the chosen arm. AWM-N Page 3 of 4...
- Page 4 No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. ©20240520...
Need help?
Do you have a question about the AWM-N and is the answer not in the manual?
Questions and answers