KSIX BXKTAGCARD User Manual

CardTag – BXKTAGCARD
Item locator – User manual
1. Characteristics
1.1 Technical specifications
Rechargeable battery (Qi charge): 110 mAh
Speaker: Yes
Audio operating range: 10 m
Compatibility: iOS 14.5 / iPadOS 14.5 / MacOS 12.5 and later
versions
App: Apple Find My
Dimensions: 8.5 x 5.3 x 0.3 cm
Weight: 12 g
1.2 In the box
1 x CardTag
1 x Manual
1.3 Diagram
1. Keychain hole
2. LED indicator
3. Button
1.4 About the battery and charging
The CardTag's battery life is approximately 2 months.
To charge the device use a wireless charger. When being
charged, the light indicator will turn red. The red light will
turn off when the battery is fully charged.
1.5 About resetting the device
Press the button, you will hear a short beep. Then, press the
button within 2 seconds and hold it for 5 seconds until you
hear a long beep, which means that the device was reset
successfully.
2. Pairing and setting
In order to set the CardTag on pairing mode, tap on its
button and follow the next steps:
1. Once the device has powered on, place your Apple device
right next to the CardTag and enable your device's
Bluetooth.
2. Access the Find My app. You should not need to download
it, since the app comes included in all Apple devices.
3. Once you access the app,
tap on the Items option.
This will appear:
5. Tap on Connect. Once it is
4. Then, tap on the Other
Supported Item option.
Your device will start
looking for the CardTag.
6. Then, the app will also
ENGLISH