Download Print this page

Home 393/1585 Manual

Candelabra floor lamp

Advertisement

Quick Links

Maintenance
This fitting is designed for indoor use only. Do not use polish or abrasive cleaner - just a soft dry cloth.
BULB REPLACEMENT
1. Switch off the mains power supply.
2. Before replacing the bulb, allow it to cool down for at least 10 minutes.
3. Never touch the bulb with your fingers directly, cover it with a cloth.
4. Loosen the bulb and remove it from the lamp.
5. Replace a new bulb with same voltage and wattage (3 x Max. 10W E14).
Recycling electrical products
You should now recycle your waste electrical goods and in doing
so help the environment. This symbol means an electrical product
should not be disposed of with normal household waste. Please
ensure it is taken to a suitable facility for disposal.
Visit www.recycle-more.co.uk, click on "bank locator" and enter
your postcode to find your nearest recycling site.
We care about our quality and what you think,
If you have any comments, good and bad,
Please call our Careline Argos: 0345 6400 800
or visit www.argos.co.uk
Your statutory rights are not affected.
Produced in China.
Sainsbury's Supermarkets Ltd, London, EC1N 2HT, UK.
Sainsbury's (NI) Ltd, Forestside Shopping Centre, Upper
Galwally, Belfast, BT8 6FX, UK.
4
Care & Instruction Manual
For household and indoor use only
Please read and retain these instructions for future reference
Candelabra Floor Lamp
SKU 393/1585
SKU 484/3603
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 393/1585 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Home 393/1585

  • Page 1 3. Never touch the bulb with your fingers directly, cover it with a cloth. 4. Loosen the bulb and remove it from the lamp. 5. Replace a new bulb with same voltage and wattage (3 x Max. 10W E14). SKU 393/1585 SKU 484/3603 Care & Instruction Manual...
  • Page 2 Important • Read these instructions carefully and familiarize yourself with the procedure before assembling the unit. • Take all the components and fittings out of the plastic bag and separate them into their groups. • Ensure you have enough space to lay out all the parts before assembly. •...

This manual is also suitable for:

484/3603