Testing The Scanner - Genius ColorPage HR3200 User Manual

T e s t i n g t h e S c
T e s t i n g t h e S c
The following describes how you can check if the scanner is properly functioning
with your computer and the scanning software by performing your first scan with our
bundled image-editing application NewSoft Presto! Image Folio. When you get
familiar with the scanning, you may alternatively use other TWAIN compatible scanning
program or image-editing application to do your scanning projects. Before testing your
scanner, double check to make sure that all connections are securely fastened.
To properly test your scanner, please perform the following steps:
1. Open the scanner's document cover and place a picture onto the scanner
glass headfirst and face-down.
Front of Scanner
2. Gently close the document cover.
3. Click on the Windows Start button to launch NewSoft Presto! Image Folio.
4. If you have only one scanner connected with your computer, please skip to
Step 5. If you have more than one scanner or other imaging device installed
on your computer:
Click Select TWAIN Source from the File menu of Presto! Image Folio and
then choose this scanner as the default scanning source.
5. Within Presto! Image Folio, click on File | Acquire | Acquire.
6. The Genius TWAIN interface will open.
7. Click on the Scan button.
8. If an image appears on your screen, your scanner is working properly.
If the test failed in any way, please refer to "The Scanner Utility" section
of this manual and follow the instructions therein.
Attention
11
Genius Scanner
a n n e r
a n n e r
Removable
Document Cover
Place document
facedown to center