Advertisement
Advertisement
Table of Contents
Summary of Contents for Crown RW1S
- Page 1 ULTRASONIC WATER SPRAY WINDOW CLEANING ROBOT USER MA NUA L...
- Page 3 INDEX ENGLISH Important safeguards Parts list Content of the box Installation intructions Instruction and cautions Bluetooth connection (optional app control) Path planning Spot cleaning route Meanings of led indicator lamp and voice Remote control Parameters Water tank maintenance Troubleshooting Safety Warranty Fault list Customer information...
- Page 4 ENGLISH ENGLISH...
-
Page 5: Parts List
PARTS LIST Water tank cover ON/OFF/Pause Button Press and hold for 3 seconds: Switch on/off Long press 8 seconds: Bluetooth reset (see Bluetooth connection page) Short press: start/continue/pause Status Indicator Buzzer Power Cord Hole Sideview Nozzle Nozzle safety rope port Mop Holder (normally not disassembled, Direct load wipes... -
Page 6: Content Of The Box
CONTENT OF THE BOX Window Cleaning Mop Holder x2 Remote Control x1 (installed) Robot x1 Mops x Safety Cable x1 Adapter x1 AC wire x1 Water Bottle x1 User Manual x1 ENGLISH... - Page 7 INSTALLATION INTRUCTIONS Ensure the knob of the safety cable is fully tightened to the frame. We recommend to fasten the buckle side of the safety cable to an object which is strong enough and will not be dragged, and reserve a suitable length for the device to work. Cover each m op h older w ith a m op.
- Page 8 Fill t he water t ank and c over w ith t he plug This product cannot be drenched, dry the surface residual moisture after filling with water. Using concentrated cleaning liquid in this product is strictly prohibited, so as not to block the spray hole and pump.
- Page 9 Insert t he windows c leaner p ower c ord i nto t he end o f t he adapter and t ighten t hem. Connect t he two ends o f t he AC wire to t he adapter and t he socket r espectively. Long-press t he power b utton (more than 3 s econds), and t he robot w ill t urn o n.
- Page 10 INSTRUCTION AND CAUTIONS Safety Rope Check whether the safety rope is intact and is on a stable object. Working Environment Inspection Ensure the glass surface is dry, please do not use it when it is raining or when the glass surface is foggy. Do not use on broken and cracked glass.
-
Page 11: Bluetooth Connection
BLUETOOTH CONNECTION (OPTIONAL APP CONTROL) non-standard version 1.Bluetooth Reset (1) Turn off the robot, disconnect the DC power supply, and plug in the DC power supply again. Long press for more than 8 seconds (2) Press and hold the power/start button for more than 8 seconds. -
Page 12: Path Planning
PATH PLANNING Put the windows cleaner in the centre of the glass far away from the window frame. Long press the Power/Start button to turn the robot on, and then short press the button to start it. The robot will automatically move upward, then move right. At last, it will reach the top right corner of the glass. - Page 13 SPOT CLEANING ROUTE Spot Wiping: In the user specified area range, the robot will start up and down cleaning at Spot Cleaning. Open the water spray function when cleaning dirty areas. The upward nozzle will spray water while cleaning to reach a better cleaning result. MEANINGS OF LED INDICATOR LAMP AND VOICE Means lndicator...
-
Page 14: Remote Control
REMOTE CONTROL To Top/Bottom Left/Right Stop at the end of the glass Start(x1)/Pause /Continue Small water spray Large water spray Water spray on/off Spot Cleaning Cleaning twice To p revent m isuse by c hildren, please press p ause button b etween c ommands v ia remote controller. Otherwise, the controller c ommands b utton i s i nvalid ENGLISH... - Page 15 PARAMETERS Model: Voltage: Watt: Decibels: 70db Size: 278* 140* 80mm Current: 300mA Capacity 650mAh Approx 25 mins (the remaining power UPS Battery Using Time of Built-In Battery will affect the time) 2 00-3000pa Suction Power Minimum Using area 300* 300mm WATER TANK MAINTENANCE Please Ensure water or solution do not spill out of the water tank.
-
Page 16: Troubleshooting
TROUBLESHOOTING When the error indicator is flashing red with continuous and short sounds, please inspect if: The plug of the power cord is loosened or damaged and results in power off or poor contact. The glass or mop is too wet and results in too low friction. The glass has impurities attached and results in too high friction. -
Page 17: Usage Requirements
SAFETY Usage requirements: Make sure the safety rope is not broken, and fixed in an immovable object when use the robot. When need to work at height outside, you must set up a ground safety warning to prevent falling accidental personal injury. Do not drenched with water.
Need help?
Do you have a question about the RW1S and is the answer not in the manual?
Questions and answers