Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for M.I.C. AV9V2 Ultra
Summary of Contents for M.I.C. AV9V2 Ultra
- Page 1 AV9V2 Ultra Android Car Multimedia System for Volkswagen/Seat/Škoda - 1 -...
-
Page 2: Table Of Contents
Table of Contents Introduction ....................................- 3 - Safety Instructions ..................................- 3 - Copyright Information ................................- 4 - Product Components ................................- 4 - Specifications ....................................- 7 - Package Contents ..................................- 7 - Rear Connection Diagram ..............................- 8 - Installation .................................... -
Page 3: Introduction
Introduction The hardware and software configurations described may vary depending on the software version. If you notice any discrepancies between the manual and your product, please contact us. Attention: Please read the instruction manual carefully before use to ensure proper and safe usage. Safety Instructions Important safety precautions: The product retailer cannot accept liability for product defects, personal injury, or property damage if any of the following precautions are violated. -
Page 4: Copyright Information
Please turn off the ignition before installation as short circuits could occur when the engine is running. Handle the device carefully during installation to prevent damage to cables or electronic components, as this could pose a fire hazard. Avoid using bolts or nuts to connect the device to safety-related components like the steering wheel, fuel system, or brake system, as this could lead to a fire or accident. - Page 5 Front View of AV9V2-Ultra: Rear View of AV9V2-Ultra: - 5 -...
- Page 6 Front view: 1 : mSD slot for files, media, music, 2 : MIC: Microphone and updates 3: HOME: Call up the home menu 4: Back : Switches to the previous menu 5 : Menu: Call up the menu bar 6 : POWER/MUTE: Switch on, off / silent 7: Louder 8: Quieter 9: NAVI: Start the navigation app...
-
Page 7: Specifications
Package Contents AV9V2-Ultra: Specifications Operating voltage : 9V-16V DC Maximum operating current: ＜ 11A @14.5V Standby operating system current: 6MA Operating temperature: -25 ℃ to +65 ℃ Storage temperature: -40 ℃ to +80 ℃ Relative humidity: 5% to 95%(frost-free) Positioning mode: GPS Positioning accuracy: ≤15M Positioning accuracy by speed: ≤0.1M/ S Speaker output power: 4x45W (Peak), 4x28W (RMS) -
Page 8: Rear Connection Diagram
WIFI antenna 1 piece DAB+ antenna 1 piece USB cable 1 piece Audio/video cable bundle 1 piece microSIM card connector 1 piece Quick Start Guide 1 piece Rear Connection Diagram Quadlock connector CAN-H – CAN bus pin high CAN-L – CAN bus pin low NC –... - Page 9 For operation, the radio requires a working CAN signal on CAN-H/CAN-L, 12V on B+, and a ground on GND. As an alternative to the CAN signal, you can also manually give the radio a 12V ignition signal via the red "ACC" cable from the cable bundle supplied, but then do not use the CAN bus communication (e.g.
-
Page 10: Installation
Connector B: Dual USB Cable USB1/USB2 – USB ports for USB sticks (only limited charging capacity for phones) SWC-GND – Ground output for external devices Connections C to F Ports C and D are not in use. A special SKAA-63 front camera connection, which supports automatic switching between the front and rear view cameras when maneuvering, can be added to port E (not included in the package), The included SIM card cable should be connected to port F. -
Page 11: Home
HOME When you turn on the device, you are first directed to the home menu. You can slide the menu left or right with your finger. You can return to the home menu at any time by pressing . You can independently add and remove apps and widgets on the home screen (2). HOME(1) HOME(2) This product offers navigation, radio, Bluetooth, DAB+, DVR, WiFi, and many other features. -
Page 12: Install Launcher / Change User Interface
Note that pressing the graphic part of the button is necessary for the app list to appear. Pressing the other half of the button will not display the list. The navigation button can be configured under Settings > CAR > Navi > “Set navigation app”. Install Launcher / Change User Interface As with a typical smartphone or tablet, you can customize the user interface of your AV9V2-Ultra to your liking by installing other launchers, which can completely alter the design of the home screen. -
Page 13: Bluetooth
Briefly tap to pre-search for a radio station; hold down for reverse search (0.05 MHz) Briefly tap to continue searching for a radio station; hold down to advance 0.05 MHz Briefly tap for an automatic station search; tap again to stop it. At FM frequencies, tap this button to toggle the stereo effect on/off;... - Page 14 Call screen Numeric Keypad Contacts Call History Bluetooth Pairing Bluetooth Settings Answer Call Delete Last Digit; hold down to delete the entire entry Contacts Initiate a Phone Call (select a contact beforehand) Search for Contact - 14 -...
- Page 15 Import Contacts (confirmation required on mobile phone) Call History Incoming Calls Outgoing Calls Missed/Rejected Calls Automatic Callback Bluetooth Pairing Search for Nearby Bluetooth Devices Pair with Selected Device Disconnect from the Selected Device - 15 -...
-
Page 16: Import Contacts
Remove Selected Device from Overview Bluetooth Settings In the Bluetooth settings, you can modify the display name and Bluetooth PIN of the AV9V2-Ultra. Additionally, you can also configure whether the AV9V2-Ultra should automatically accept or reject connection requests. Import Contacts Once your mobile phone is connected to the device via Bluetooth, you can import the contact data from your mobile phone into the device. -
Page 17: Bluetooth Music
2. Tap the icon. 3. Tap the icon in the bottom right corner. 4. The contacts should now be successfully imported. Bluetooth Music Tap the Phone app. After opening the app, a large play button appears, allowing you to start the music directly. -
Page 18: Music
Music Tap the Music app to access the music menu. Here, you can play audio files from the device’s hard drive, your mSD card (slot on the front), or your USB stick (double USB cable included). WMA, MP3, and many other formats are supported. Playlist Back Stop/Play... -
Page 19: Sound
Manufacturer: No specific recommendations Sound The AV9V2-Ultra already incorporates an integrated digital sound processor (DSP), which further enhances the audio signal in real time. You can utilize this to make various sound adjustments: The Loudness function automatically adjusts bass and treble, compensating for volume changes. In psychoacoustics, it’s a well-known phenomenon that music sounds different at significantly louder or quieter volumes than it was mixed at. - Page 20 The sound output delay can be set in the menu shown above. Enter the exact distance between the left/right and front/rear speakers. Then position the crosshairs at the location where you want the sound to be directed. The device will then automatically calculate the appropriate delay time.
-
Page 21: Video
Video Tap the Video app to access the video menu. The app supports 1080P video playback. By default, video playback is disabled while driving for safety reasons. You can enable playback in Settings > CAR > Driving Settings > “Watch Video”. Warning! Watching TV or videos while driving can lead to car accidents. -
Page 22: File Manager
File Manager Tap the File Manager app to access file management. Here, you can access, delete, copy, cut and paste all files stored on the device and connected removable media. Select a file or folder by tapping the checkbox next to it. Copy files by tapping , and paste copied files using the icon . -
Page 23: Chrome
1) Create a Wi-Fi hotspot on your smartphone and select it on the radio under „Settings > Network > Wi-Fi/Internet“. The exact procedure for initiating the Wi-Fi hotspot on the smartphone varies depending on the mobile phone. The menu item is typically labeled “Mobile Hotspot” or “Personal Hotspot” and is located in the mobile phone settings. -
Page 24: Navigation
Navigation Upon delivery, Google Maps is already pre-installed on your device, and an installation file for the latest version of HERE WeGo is included. With both apps, you can navigate worldwide, download maps for offline navigation, and respond to current traffic jams and traffic reports with an internet connection. -
Page 25: Dab
To download offline maps in HERE WeGo, tap “Download Maps” under “Offline Maps” in the Start menu. Here, select the desired countries and tap “Download maps”. The desired map area will be downloaded, making it available even without an internet connection. Offline Mode HERE WeGo offers the option to access only downloaded offline maps, avoiding the use of mobile data even when you have an internet connection. -
Page 26: Photo
When you start the DAB+ app for the first time, a station search is required, which you can initiate by tapping the magnifying glass symbol. You can save a channel as a favorite by selecting the small heart symbol in the top right corner of the channels. -
Page 27: Install Apps
Tap the “Albums” button to open a selection menu, allowing you to organize your saved images by albums, locations, times, people, or tags. Install Apps You can install any compatible Android app of your choice on the AV9V2-Ultra. There are two options: Installation via the Google Play Store As with your Android smartphone or tablet, there is a fully functional PlayStore on the device, which... -
Page 28: Updates
Updates You can download the latest updates for your AV9V2-Ultra from our homepage at any time. We especially recommend performing updates in the event of specific problems to avoid potential complications. The system update manages the user interface and functions of the device. The MCU update is the firmware of the microcontroller and manages technical properties such as current flows, communication between the hardware components, and switch-on/off behavior. -
Page 29: Picture-In-Picture & Split Screen
Open App You can open a specific app with the following Google command: “Ok Google Open app [app name]” Picture-in-Picture & Split Screen These functions allow you to view two apps at the same time. For example, you can view your navigation app and your music player simultaneously. -
Page 30: Settings
recommend using the pink “Camera Power” cable from the radio cable bundle for the power supply instead. Many reversing cameras have an outgoing red power cable from the RCA video plug, which can be used for this purpose. The radio automatically receives the reverse gear signal from the vehicle and switches to the reversing screen accordingly. - Page 31 Airplane Mode : As with your smartphone, you can use this function to deactivate the sending and receiving of WiFi, mobile network, and Bluetooth data. Connected Devices Under „Connected Devices“, you can view all devices connected to this device and manage Bluetooth settings.
- Page 32 Tones: Key Tone: Here, you can adjust the volume of the touch tone. Volume: Here, you can adjust the overall volume of the system. Default Notification Tone: Here, you can choose your preferred notification tone from various tones. Default Alarm Tone: For alarm functions, you can select your preferred signal tone here.
- Page 33 Automatically Sync Data: Choose whether to automatically update the data in your Google apps and receive notifications about updates. Accessibility: Text-to-Speech: Use this feature to have text read aloud on the screen. Font Size: Here, you can adjust the font size on the screen to make it easier to see content on the screen. Display Size: Here, you can adjust the display size of screen content to make it easier to see content on the screen.
-
Page 34: Factory Settings
Factory Settings (password 126): The settings are very sensitive and therefore password protected. Please refrain from changing any factory settings without instructions. Here, you can set an individual start logo and make various other advanced settings. You will find more detailed information on this in the following pages. Please only make changes as instructed.. Google: Here, you can make all the settings for your Google account. - Page 35 Set Your Own Boot Logo You can add your own boot logo under Settings > CAR > Factory Settings > 126 > Boot Logo. Select "User" and then set the boot logo of your choice. The boot logo should meet the following requirements: Image format: 1280x720 File Type: PNG Adjust Key Lighting...
- Page 36 3. You can double assign any key (except the volume keys). Select the desired short press function in the left column and if you want to set up a second long press function, select it in the right column. Confirm with „OK". 4.
-
Page 37: Troubleshooting
Customer Version 2 reduces the detection voltage. This can help with the following behavior: a) With an older vehicle, the device is completely restarted every time the vehicle is started. b) On a newer vehicle with an automatic start/stop system, the sound is interrupted every time. Customer Version 3 hides the sound for eight seconds after a warm boot. - Page 38 A video file cannot be Supported formats include WMV, AVI, RMVB, etc. played. The correct file size is 1080P H.264 (max). Check the connection. Drive to areas where GPS signals penetrate. GPS is not working properly. Place the GPS antenna on the A-pillar. Use the included GPS antenna.
- Page 39 - 39 -...
Need help?
Do you have a question about the AV9V2 Ultra and is the answer not in the manual?
Questions and answers