Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS FOR PRIMO OVAL MODELS: JR, LG, XL, AND XXL
TOOLS REQUIRED:
•
Adjustable Wrench, or
10mm, 11mm Wrench
HARDWARE INCLUDED:
Four (4)
Four (4)
M6 X 20
M6 X 16
Threaded
Flat
Studs
Phillips
Head
Screws
Four (4)
Eight (8)
M6 Lock
M6 X 20
Nuts
Self-Tap
Phillips
Head
Screws
TO ASSEMBLE:
1. Attach the casters to base supports A and B. Each base
support gets (1) non-locking and (1) locking caster. See
Figures 1 and 2.
Base Support A - Figure 1
PG1000502-1-0124
INSTRUCTIONS ( ALL - IN - ONE )
CRADLE ASSEMBLY
•
Large Phillips
Screw Driver
Four (4)
M6
Accorn
Nuts
—
Empire Comfort Systems Inc. • Belleville, IL
Base Support B - Figure 2
2. Holding Base Support B on the floor insert Base Support
A through B as shown. See Figure 3.
insert then
rotate base
support 90°
B
A
Figure 3
Page 1
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Primo Water CRADLE
- Page 1 INSTRUCTIONS ( ALL - IN - ONE ) CRADLE ASSEMBLY ASSEMBLY INSTRUCTIONS FOR PRIMO OVAL MODELS: JR, LG, XL, AND XXL TOOLS REQUIRED: • Adjustable Wrench, or • Large Phillips 10mm, 11mm Wrench Screw Driver HARDWARE INCLUDED: Four (4) Four (4)
- Page 2 PRIMO GRILL - ( ALL - IN - ONE ) CRADLE ASSEMBLY 3. Align the center holes as shown. Insert the (2) M6X20 5. Align one of the stabilizers over the fasteners and attach threaded studs through the top of the center holes and (2) M6 acorn nuts.
- Page 3 PRIMO GRILL - ( ALL - IN - ONE ) CRADLE ASSEMBLY 10. Completed cradle assembly. See Figure 10. 8. Fasten (4) self-tapping screws per shelf in mounting holes. See Figures 8a and 8b for proper placement. The Oval XL and XXL use the outer holes and the other two models the inner holes.
- Page 4 918 Freeburg Avenue Belleville, IL 62220 618.233.7420 www.primogrill.com Page 4 PG1000502-1-0124...
Need help?
Do you have a question about the CRADLE and is the answer not in the manual?
Questions and answers