1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Construction Equipment
  5. HAULMASTER 60732
  6. Owner's manual & safety instructions

Harbor Freight Tools HAULMASTER 60732 Owner's Manual & Safety Instructions

1/2 ton capacity pickup truck crane
Hide thumbs

Advertisement

Table of Contents

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
1/2 TON CAPACITY
PICKUP TRUCK
CRANE
Vehicle Not Included
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
24d
®
60732

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HAULMASTER 60732 and is the answer not in the manual?

Questions and answers

Related Manuals for Harbor Freight Tools HAULMASTER 60732

Summary of Contents for Harbor Freight Tools HAULMASTER 60732

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.

  • Page 2: Table Of Contents

    Table of Contents Safety ............2 Maintenance ..........8 Specifications ..........3 Parts List and Diagram ......10 Assembly ............ 4 Warranty ............ 12 Operation ............ 6 ® WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 3: Specifications

    21. Maintain labels and nameplates. These carry important information. If unreadable or missing, 17. Stay alert. Watch what you are doing, and use contact Harbor Freight Tools for a replacement. common sense when operating Crane. 22. The warnings, precautions, and instructions 18.

  • Page 4: Assembly

    Assembly Instructions Read ENTIRE IMPORTANT SAFETY INFORMATION section at beginning of this manual including all text under subheadings therein before set up or use of this product. 1. Locate a mounting position so the Crane will be near 4. Slide Post (13) onto Base (18) and secure end of truck bed and can be attached to frame.
  • Page 5 6. Attach Boom (14), Bracket facing down, to 9. Connect Hook and Chain (9) to Boom Upper Post Bracket using Bolt (4), Spring Extension by putting end link through Oval Washer (12) Washer (10) and Nut (5). Hole and securing with Bolt (6), Spring Washer (12), Washer (10) and Nut (5).

  • Page 6: Operation

    Operating Instructions Read ENTIRE IMPORTANT SAFETY INFORMATION section at beginning of this manual including all text under subheadings therein before set up or use of this product. Note: Once Assembly is complete, tighten ALL Bolts before initial operation. Bleeding Instructions IMPORTANT! Before first use, check for 4.
  • Page 7 Loading WARNING! TO PREVENT SERIOUS INJURY: 4. Attach Hook to properly secured load, giving Engage parking brake before use. Do not specific attention to load balancing. move vehicle with load attached to Crane. 5. Before lifting load, make sure chain 1.

  • Page 8: Maintenance

    Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1.
  • Page 9 Troubleshooting TO PREVENT SERIOUS INJURY: Use caution when troubleshooting malfunctioning Crane. Stay clear of supported load. Completely resolve all problems before use. If solutions presented in Troubleshooting guide do not solve the problem, have a qualified technician inspect and repair Crane before use. After Crane is repaired: Test it carefully without a load by raising and lowering it fully, checking for proper operation, BEFORE RETURNING CRANE TO OPERATION.

  • Page 10: Parts List And Diagram

    Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 11 Assembly Diagram 60732 For technical questions, please call 1-888-866-5797. Page 11...

  • Page 12: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents