Related Manuals for COLORATO CLOJ-S200F
Summary of Contents for COLORATO CLOJ-S200F
- Page 1 INSTRUCTION MANUAL AUTOMATIC JUICER FOR ORANGE MODEL: CLOJ-S200F FOR ORANGES WITH TAP TRAY Read carefully these instructions before using the appliance and keep them for future reference...
-
Page 2: Technical Parameters
The juicer is consisted of the stainless steel shell, the trans-parent plastic cover, food-grade plastic parts (Convex ball and Concave ball) and remaining collector. It has anti-corrosion protection and it is easy to wash. It can produce fresh and delicious juice in a few seconds after operation. - Page 3 3. Pour the cleaned orange into the machine fruit basket. 4. Switch on the machine and prepare it to work. 5. Press the start switch and start feeding artificially the orange continuously into the feeding port. After juicing is finished, the fresh juice will be discharged, and the fruit peel is automatically separated to enter into the fruit peel bucket.
-
Page 4: Maintenance And Cleaning
7. After the use of this machine is completed, turn off the switch and disconnect the power supply. Maintenance and cleaning 1. Before cleaning the product, the start switch must be turned off, disconnect the power supply, wait until the machine stops completely. 2. - Page 6 c) After the cleaning of the product is completed, re-install each part in the opposite order (especially pay attention whether the safety switch button is pressured). Production troubleshooting and maintenance instruction 1. Electrical fault A) Τhe safety switch does not work: 1.
- Page 7 (figure1) C. Remove the two square hole templates. D. Use one square and a triangle template to lock the left (or right) upper four corner angle shaft and lower triangular shaft (figure 2) under the ridge axis, and then install the small cylindrical gear.
Need help?
Do you have a question about the CLOJ-S200F and is the answer not in the manual?
Questions and answers