Ifly Cdu Setup - Flight Deck FDS-PRO-MX-CDU Manual

iFly CDU Setup

http://www.flightdecksolutions.com/pcupload/FDS-CDU-iFly-Module-v1.0.zip
Follow instructions below. Install FDS-CDU-iFly-Module software after FDS-CDU Controller Software.
Installation Steps
1. First, you will need to download and install the FDS CDU Controller software from
http://www.tekworx.ca/downloads.php
FDS-CDU ver 3.1.5
*This is the main controller software required to interface the hardware to any software.
2. After successfully running FDS-CDU iFly Module v1.0.exe the installer has made the
changes to allow the CDU Controller to interface with the CDU on the FSX iFly aircraft.
What did the installer do :
You will find a new folder : \FDS iFly Interface\CDU
●
This contains iFlyCDU.dll which is the iFly addon module for the CDU Controller
software.
A Registry entry is also added during the installation to register the iFlyCDU.dll with
●
the CDU Controller software:
HKLM\Software\TEKWorx Limited\FDS-CDU\Extra Modules\iFly
3. Now all of the components have been installed you need to assign the connected CDU's as
either Captain or FO in the CDU Controller software.
To do this you should connect the CDU's to you computer via the USB cables and run the
CDU Controller software – FDS-CDU.exe
It will show as an icon in the systray on the taskbar (down by the clock)
4. Now Right-Click on the icon and select "Configure" from the popup menu.
iFly should be available and selected in the "Available Modules" dropdown menu.
FDS-PRO-MX-CDU/MCDU 2014 Ver 1.8
LINK
FIG. 23
Page 27