Advertisement
Quick Links
092570 RevA
HLX-PSUPPLY
Replacement Low Voltage Power Supply for OmniLogic
Installation Manual
Contents
Description............................1
Installation............................1
HLX-PSUPPLY
Hayward Pool Products
620 Division Street, Elizabeth NJ 07207
www.hayward.com
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Advertisement
Summary of Contents for Hayward HLX-PSUPPLY
- Page 1 092570 RevA HLX-PSUPPLY Replacement Low Voltage Power Supply for OmniLogic Installation Manual Contents Description......1 Installation......1 HLX-PSUPPLY Hayward Pool Products 620 Division Street, Elizabeth NJ 07207 www.hayward.com USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
- Page 2 Description The HLX-PSUPPLY is a replacement low voltage power supply for the OmniLogic pool controller. This power supply is used to power the Main Board and valve actuator outputs. Installation DANGER of Death, Injury or Property Damage if procedure not followed. This accessory connects to the OmniLogic panel beneath the dead front.
- Page 3 Re-connect the wires in the same locations on the HLX-PSUPPLY. Insert the HLX-PSUPPLY into the enclosure and secure with the three screws. Replace the dead front and power up the OmniLogic. Confirm that the power supply is functioning properly by turning on/off actuators.
- Page 4 Hayward is a registered trademark and OmniLogic is a trademark of Hayward Industries, Inc. © 2014 Hayward Industries, Inc. All other trademarks not owned by Hayward are the property of their respective owners. Hayward is not in any way affiliated with or endorsed by those third parties.
Need help?
Do you have a question about the HLX-PSUPPLY and is the answer not in the manual?
Questions and answers