Printing Pictures - Kodak MD41 - EXTENDED GUIDE Extended User Manual

Printing pictures

Direct printing with a KODAK All-in-One Printer
Your camera is compatible with PICTBRIDGE Technology, so you can print directly to
PICTBRIDGE enabled printers. You need a camera with fully charged battery, a
PICTBRIDGE enabled printer, and a USB cable.
Connecting the camera to a KODAK All-in-One Printer
1 Turn off the printer. Turn on the camera.
2 Connect the appropriate USB cable from the camera to the printer. Turn on the
printer.
The PICTBRIDGE logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu turns off, press any button to
redisplay it.
3 Highlight a printing option, then press OK.
Current Picture—Press
Marked Pictures—Print pictures that you marked for printing and choose a print
size.
Index Print—Print thumbnails of all pictures. (This option requires one or more
sheets of paper.) If the printer is capable, choose a print size.
All Pictures—Print all pictures in internal memory or on a card. Choose the
number of copies.
Image Storage—Access Auto or Internal Memory.
NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer
pictures to your computer, see
Purchase cables, accessories
www.kodak.com/go/support
to choose a picture. Choose the number of copies.
page 34.
www.kodak.com/go/md41accessories
Transferring, printing, tagging
35