Advertisement
Advertisement
Table of Contents
Related Manuals for Solem LR-IP-ECO
Summary of Contents for Solem LR-IP-ECO
- Page 1 QUICK INSTALL GUIDE LR-IP-ECO + Turbine...
-
Page 2: Creating An Account
The LR-IP-ECO + Turbine uses Bluetooth technology to enable connection and management via the MySOLEM application from just a few meters away. -
Page 3: Security Key
(Optional) Define a name and security key for your controller and press the «Validate» button. . Connect the turbine to the LR-IP-ECO, select the generator in the application, then follow the final steps to complete the association of your LR-IP-ECO. - Page 4 The message «Connection established» indicates a reliable connection. The message «No connection established» indicates that it is necessary to bring your LR-IP-ECO closer to the LR-MB or vice versa. LR-BST Select your LR-BST on the app and switch to pairing mode (only for LR-BST-25).
-
Page 5: Turbine Installation
LR-IP-ECO INSTALLATION The LR-IP-ECO can be installed indoors or outdoors. It can either be mounted on a wall with 2 plugs and 2 screws (not supplied) or placed in a manhole. - Page 6 SET FLOWMETER TURBINE As the turbine measures the consumption of your irrigation network, you can use the MySOLEM application to configure all the thresholds required for proper management of your system. Daily consumption: set your upper and lower thresholds High threshold (daily volume): maximum consumption (in m3) that you do not want to exceed in a period of 24h.
-
Page 7: Sensor Wiring
SENSOR WIRING The LR-IP-ECO has a + S - sensor input in order to connect a rain sensor, a pressure switch or a pulse sensor/water meter after cutting the blue wire. Once the sensor is connected, it must be set up through the application. - Page 8 Eg. Prog A: Station 1 = 5mn and prog B Station 1 = 10mn. All that’s left to do is program the morning departure on Prog A and the evening departure on Prog B. Important: your module works with sequential programming, which means that all stations that are set on a program (A, for example) will run one after the other.
- Page 9 What are the features required for the Bluetooth product to work? ® Android: Smartphone or tablet running Android 4.3 or greater with Bluetooth Smart 4.0 or greater. Apple: iPhone or iPad running iOS 9.0 or greater with Bluetooth Smart 4.0 or greater. Why is my station not starting? A program is defined by start times, and a list of stations to which this program applies.
- Page 10 If my turbine stops working, will my watering programs still run? Yes, the programming is independent of the turbine. EUROPE: DECLARATION CONFORMITY Solem Electronique said that watering programmer type LR-IP-ECO complies with the essential requirements of the european Directives : Directive 2014/53/UE (RED) Following standards : BLE standard : ETSI EN 300 328 v2.2.2...
- Page 11 SOLEM ELECTRONIQUE ZAE La Plaine 5, rue Georges Besse 34830 Clapiers, FRANCE Oliver Aussillous Directeur Industriel FCC NOTICE Caution : the user that changes or modifications not expressly approved by the party reponsible for compliance could void the user’s authority to operate the equipment.
- Page 12 IC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 13 9V alkaline battery 6AM6 or 6LR61 Rain sensor / Flow meter / Pressure switch connection NiMH battery Master valve connection 9V impulse solenoid connection Maximum distance between LR-IP-ECO and solenoid: 30 m Operating temperature: 0°C to 50°C IP68-rated: prolonged immersion 1m 1h OPPERATION: Bluetooth Smart 4.0 Low Energy [2400-2483.5]Mhz...
- Page 14 IMPORTANT INFORMATIONS Before installing and commissioning the product, please read the instructions in this manual. Failure to comply with these instructions may compromise the protection provided by the device. Replacing the battery with a type other than alkaline 9V 6AM6 or 6LR61 may damage the product. In the event of failure, the manufacturer cannot be held responsible beyond the repair or replacement of the product under its legal legal warranty.
Need help?
Do you have a question about the LR-IP-ECO and is the answer not in the manual?
Questions and answers