Download Print this page

Advertisement

Quick Links

Manuel d'Utilisateur
PORTHOS
Foyer extérieur / Outdoor fireplace
Modèles:
Stainless et Stainless Noir /
Stainless and Stainless Black
2 pare-vents inclus / 2 wind screens included
490, rue de l'Argon, Québec, QC. Canada G2N 2C9
Tél.: 418-849-8095
Fax.: 418-849-0077
Jaroby.com
*Photo à titre indicatif seulement
R. 2024-05-27

Advertisement

loading
Need help?

Need help?

Do you have a question about the PORTHOS and is the answer not in the manual?

Questions and answers

Summary of Contents for J. A. Roby PORTHOS

  • Page 1 Manuel d’Utilisateur PORTHOS Foyer extérieur / Outdoor fireplace Modèles: Stainless et Stainless Noir / Stainless and Stainless Black 2 pare-vents inclus / 2 wind screens included 490, rue de l’Argon, Québec, QC. Canada G2N 2C9 Tél.: 418-849-8095 Fax.: 418-849-0077 Jaroby.com *Photo à...
  • Page 2: Spécifications

    Spécifications / Features Combustible / Combustible Bois / Wood Hauteur / Height 50’’½ (129 cm) Largeur / Width 27’’½ (69 cm) Épaisseur / Thickness 16 G (Principal/Main); 22 G (Cheminée/Chimney) Poids (approximatif) / Weight (approximately) 70 lbs (31 kg) AVERTISSEMENT WARNING Lire attentivement les directives suivantes avant d'installer votre appareil.
  • Page 3: Components List

    Liste de Composantes / Components List Tête Base Cheminée et 2x Firebox B. Base panneaux pare-vent D. Screws C. Chimney and 2x wind shields...
  • Page 4 Déballage / Unpacking Sortir le foyer de la boîte 1. Remove the fireplace from the box Devisser et retirer les vis de barrures 2.Remove the retaining screws...
  • Page 5 Déballage / Unpacking Recommandation: Travail à deux Recomendation: Two-person job Retirer la base de l’intérieur de la tête. Enlever la cheminée et les pare-vents de Installer la tête sur la base l’intérieur 3. Remove the base from inside the firebox. 5.
  • Page 6: Installation

    Installation / Setting up Insérer les languettes dans À l’aide d’un marteau, plier les languettes le trou de positionnement vers l’intérieur 6. Insert the tabs through the 7. Using a hammer, bend the tabs inwards positioning cutouts. *Au besoin, utiliser tournevis *If needed, use a screwdriver...
  • Page 7 Installation / Setting up À l’aide de pince, plier les languettes de À l’aide des vis «D», Positionner les pare-vents à support de la cheminée fixer la cheminée l’endroit désiré 10. Position wind shields as 8. Using pliers, bend the chimney support tabs. 9.

This manual is also suitable for:

FeporsFeporsn