Advertisement

Quick Links

OWNER'S MANUAL
DRYER
Read this owner's manual thoroughly before operating the
appliance and keep it handy for reference at all times.
ENGLISH
DLEX89*0* / DLGX89*1*
www.lg.com
MFL67731062
Copyright © 2021-2024 LG Electronics Inc. All Rights Reserved.
Rev.05_031424

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DLEX8900B.ABLEECI and is the answer not in the manual?

Questions and answers

Summary of Contents for LG DLEX8900B.ABLEECI

  • Page 1 OWNER'S MANUAL DRYER Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times. ENGLISH DLEX89*0* / DLGX89*1* www.lg.com MFL67731062 Copyright © 2021-2024 LG Electronics Inc. All Rights Reserved. Rev.05_031424...
  • Page 2: Table Of Contents

    32 OPERATION Before Use Loading the Dryer Control Panel Dry Cycles Cycle Modifiers Options and Extra Functions 44 SMART FUNCTIONS LG ThinQ Application Smart Diagnosis Function 48 MAINTENANCE Regular Cleaning 50 TROUBLESHOOTING FAQs Before Calling for Service 57 LIMITED WARRANTY...
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Safety for a Dryer WARNING Fire Hazard Failure to follow safety warnings exactly could result in serious injury, death or property damage. Do not install a booster fan in the exhaust duct. •...
  • Page 4: Warning Statements

    IMPORTANT SAFETY INSTRUCTIONS WARNING Risk of Fire Install the clothes dryer according to the manufacturer’s instructions and local codes. Clothes dryer installation must be performed by a qualified installer. • Do not install a clothes dryer with flexible plastic venting materials. If •...
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS • The appliance must be installed and electrically grounded by qualified service personnel in accordance with local codes. • Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance. • When moving or installing the appliance in a different location, call qualified service personnel for installation and service.
  • Page 6 • Do not grasp the power cord or touch the appliance controls with wet hands. • Do not modify or extend the power cord. • If the appliance has been submerged, contact an LG Electronics customer information center for instructions before resuming use.
  • Page 7 IMPORTANT SAFETY INSTRUCTIONS • Do not put living animals such as pets inside the appliance. • Do not put any part of your body, such as your hands or feet, or metal objects under the appliance. • Do not let your hand get pinched when opening or closing the dryer door. •...
  • Page 8: Caution Statements

    IMPORTANT SAFETY INSTRUCTIONS CAUTION STATEMENTS CAUTION • To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following: Installation • Install the appliance on a firm and level floor. •...
  • Page 9: Product Overview

    PRODUCT OVERVIEW PRODUCT OVERVIEW Product Features The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View Control Panel Lint filters Leveling feet Reversible door Rear View...
  • Page 10 10 PRODUCT OVERVIEW Product Specifications Model DLEX89*0* / DLGX89*1* Please refer to the rating label for detailed Electrical Requirements information. Min. / Max. Water Pressure 20 - 120 psi (138 - 827 kPa) Dimensions (Width X Depth X Height) 29'' X 32 1/8'' X 40 3/4'' (74.0 cm X 81.5 cm X 103.6 cm) Maximum Depth with Door Open 59'' (151.8 cm) Gas : 151.7 lb (68.8 kg)
  • Page 11 PRODUCT OVERVIEW NOTE • For your safety and extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of unauthorized components or parts.
  • Page 12: Installation

    12 INSTALLATION INSTALLATION Before Installing Installation Overview Please read the following installation instructions first after purchasing this dryer or transporting it to another location. Choose the proper location. Level the appliance. Vent the appliance. Connect the inlet hose (for steam models) Connect the Gas / Electric dryer.
  • Page 13: Choosing The Proper Location

    INSTALLATION Choosing the Proper • For garage installation, you will need to place the appliance at least 18 inches (45.7 cm) above the Location floor. The standard pedestal height is 15 inches (38 cm). You will need 18 inches (45.7 cm) from the garage floor to the bottom of the appliance.
  • Page 14 14 INSTALLATION Dimensions and Clearances The following clearances are recommended for the appliance. • Additional clearances should be considered for ease of installation and servicing. • Additional clearances should be considered on all sides of the dryer to reduce noise transfer. Installation Spacing for Recessed Area or Closet Installation Description Dimension/Clearance...
  • Page 15 INSTALLATION Closet Ventilation Requirements Closets with doors must have both an upper and lower vent to prevent heat and moisture buildup in the closet. One upper vent opening with a minimum opening of 48 sq. in. (310 cm ) must be installed no lower than 6 feet above the floor.
  • Page 16 16 INSTALLATION Installation Spacing for Cabinet For cabinet installation with a door, minimum ventilation openings in the top of the cabinet are required. Description Dimension/Clearance Depth of Ventilation Opening 7″ (178 mm) Back Clearance 5″ (127 mm) Depth 32 1/16″ (815 mm) Front Clearance 1″...
  • Page 17: Leveling The Appliance

    INSTALLATION Leveling the Appliance and front to back. Make sure that all four leveling feet are in firm contact with the floor. WARNING • Use long-sleeved gloves and safety glasses. • The appliance is heavy. Two or more people are required when installing the appliance.
  • Page 18 18 INSTALLATION You will be removing the screws shown below Remove the door from the cabinet cover. (6 on left, 4 on right). Remove the four decorative screws on the left using a screwdriver. Move the door to the left side and line up the holes in the hinge with the holes in the cabinet.
  • Page 19: Installing The Vent Kit

    NOTE • An adapter kit, part number 383EEL9001B, may be purchased from your LG retailer. This kit contains duct components necessary to change the appliance vent location. • Right-side venting is not available on gas models.
  • Page 20: Stacking The Appliance

    20 INSTALLATION • Place the washer on a solid, stable, level floor capable of supporting the weight of both appliances. • Do not stack the washer on top of the dryer. • If appliances are already installed, disconnect them from all power, water and drain connections.
  • Page 21: Venting The Dryer

    INSTALLATION the wall. All non-rigid metal transition duct must be UL-listed. Use of other materials for transition duct could affect drying time. • DO NOT use sheet metal screws or other fasteners which extend into the duct that could catch lint and reduce the efficiency of the exhaust system.
  • Page 22: Connecting Gas Dryers

    22 INSTALLATION Routing and Connecting Ductwork death when using this appliance, follow requirements including the following. Follow the guidelines below to maximize drying performance and reduce lint buildup and condensation in the ductwork. Ductwork and Electrical Requirements for Gas fittings are NOT included and must be purchased Models separately.
  • Page 23 INSTALLATION • If using a rigid pipe, the rigid pipe should be 0.5- Remove the shipping cap from the gas fitting inch IPS. If acceptable under local codes and at the back of the dryer. Be careful not to ordinances and when acceptable to your gas damage the threads of the gas connector supplier, 3/8-inch approved tubing may be used when removing the shipping cap.
  • Page 24: Connecting Electric Dryers

    24 INSTALLATION Connecting Electric Dryers • If the plug does not fit the outlet, a proper outlet will need to be installed by a qualified electrician. • Connect the power cord to the terminal block. WARNING Each colored wire should be connected to the •...
  • Page 25 INSTALLATION UL-Listed 4-Wire Power Cord • Use UL-listed 4-wire #10 AWG minimum copper conductor cable. Allow at least 5 ft. (1.5 m) of wire to allow for removal and Transfer the appliance's ground wire from reinstallation of the dryer. behind the green ground screw to the center screw of the terminal block.
  • Page 26 26 INSTALLATION Attach the two hot leads (black and red) of the Install the UL-listed strain relief into the power cord to the outer terminal block power cord through-hole. screws. Thread a 30-amp, 240 volt, 3-wire, UL-listed Attach the neutral (white) wire to the center power cord with #10 AWG-minimum copper screw of the terminal block.
  • Page 27: Connecting The Water Inlet Hose

    Old hoses could UL-listed strain relief leak or burst causing flooding and property damage. Contact an LG Customer Information UL-listed 3-wire power cord Center for assistance in buying hoses. Attach the two hot leads (black and red) of the...
  • Page 28 28 INSTALLATION Check the type of installation and connect the CAUTION hose to the faucet. Connect all water supply • Do not stretch the water hoses intentionally, and hoses tightly by hand and then tighten make sure that they are not pinched, crushed or another 2/3 turn with pliers.
  • Page 29: Final Installation Check

    INSTALLATION Final Installation Check such as sand and scale from clogging the dryer inlet valve. Once you have completed the installation of the dryer and it is in its final location, confirm proper operation with the following tests. Connect the long dryer hose to the dryer Test Dryer Heating inlet valve tightly by hand and then tighten...
  • Page 30 30 INSTALLATION performed to alert you to any serious problems in Press the Start/Pause button. the exhaust system of your home. • The appliance will start the test, which will • Your appliance features Flow Sense , an last a few minutes. The heat will be turned innovative sensing system that automatically on and the temperatures in the drum will be detects blockages and restrictions in dryer...
  • Page 31 INSTALLATION Check for blockages and lint buildup. Dryer section of this manual for complete exhaust system and venting requirements. Error Codes Check the error code before you call for service. Error Possible Cause & Solution Code Temperature sensor failure. • Turn off the appliance and call for service.
  • Page 32: Operation

    32 OPERATION OPERATION Before Use WARNING • To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Operation Overview Adjust Settings Default settings for the selected cycle can now be changed, if desired, using the cycle Clean the Lint Filter modifier and option buttons.
  • Page 33: Loading The Dryer

    OPERATION Woven and Loopknit Materials fingers. Push the lint filter firmly back into place. See Regular Cleaning for more information. • Some woven and loopknit materials may shrink, depending on quality. Permanent Press and Synthetics • Do not overload your dryer. Take out permanent press items as soon as the dryer stops to reduce wrinkles.
  • Page 34 34 OPERATION Tumble Dry Label Directions Do not tumble dry Do not dry (used with do not wash) Heat Setting Label Directions High Medium No Heat / Air...
  • Page 35: Control Panel

    • Remote Start - With the LG ThinQ app, you can use a smartphone to control your appliance remotely. • Wi-Fi - Press and hold the Wrinkle Care button for 3 seconds to initiate the connection of the appliance to the LG ThinQ application.
  • Page 36 36 OPERATION Time and Status Display Flow Sense Indicator • The Flow Sense duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust flow from the dryer. Maintaining a clean exhaust system improves operating efficiency and helps minimize service calls, saving you money.
  • Page 37: Dry Cycles

    Sensor Dry Cycles Sensor dry cycles utilize LG's unique dual sensor system to detect and compare the moisture level in clothes and in the air and adjust the drying time as needed to ensure superior results. The appliance automatically sets the dryness level and temperature at the recommended setting for each cycle.
  • Page 38 Available: All Temperature Default: Med. High Available: Med. High Steam Cycles LG’s new steam technology injects fabrics with a swirling jet of hot steam to refresh clothes, reduce static, and make ironing easier. Cycle Steam Sanitary Description Use this cycle to reduce bacteria on laundry using TurboSteam.
  • Page 39 Downloaded Description This cycle allows you to download a new and specialized drying cycle to your appliance with a smartphone. • Refer to the LG ThinQ smartphone application to see the cycles available for download. Selectable Drying Options Option Cycle Damp Dry †...
  • Page 40 40 OPERATION Option Cycle Damp Dry † TurboSteam Reduce Static Wrinkle Care Energy Saver Signal Heavy Duty Bedding Perm. Press Steam Sanitary (Not adjustable) Steam Fresh (Not adjustable) Delicates Small Load Towels Air Dry Speed Dry Downloaded † This option helps to reduce the energy use by drying clothes at lower temperatures than the normal mode.
  • Page 41: Cycle Modifiers

    OPERATION Cycle Modifiers About Modifier Buttons Each cycle has default settings that are selected automatically. Customize these settings using the cycle modifier buttons. Repeatedly press the button for the desired modifier until the indicator light for the desired setting is lit. Not every option is available with every cycle.
  • Page 42: Options And Extra Functions

    42 OPERATION Options and Extra Functions • When the filter/duct is clogged, this option may not have optimal results. Your dryer includes several additional cycle • When this function is operating, the drum will options to customize cycles to meet your individual stop to allow steam to stay in the drum.
  • Page 43 OPERATION • When this function is operating, the drum will automatically turns off when the dryer door is stop to allow steam to stay in the drum. closed and the cycle starts. To turn on the light during a cycle, press and hold the Signal button for 3 seconds.
  • Page 44: Smart Functions

    • Remote Control - Control the appliance remotely or check to see how much time is left in the cycle from the LG ThinQ application. NOTE • Once the remote control feature is enabled, you can start a cycle from the LG ThinQ application.
  • Page 45 To check your network frequency, contact your Internet service provider or refer to your wireless router manual. Start a cycle from the LG ThinQ application on • LG ThinQ is not responsible for any network your smartphone. connection problems or any faults, malfunctions, or errors caused by network connection.
  • Page 46 (1) This device may not cause harmful interference opensource.lge.com. LG Electronics will also provide open source code (2) This device must accept any interference to you on CD-ROM for a charge covering the cost received, including interference that may cause of performing such distribution (such as the cost of undesired operation.
  • Page 47: Smart Diagnosis Tm Function

    If you experience a problem with your Wi-Fi equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ application. • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application.
  • Page 48: Maintenance

    48 MAINTENANCE MAINTENANCE WARNING • Unplug the appliance before cleaning. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They will damage the finish. Regular Cleaning Cleaning the Lint Filter Always clean the lint from the filter after every Cleaning the Exterior cycle.
  • Page 49 MAINTENANCE If the lint filter has become very dirty or clogged with fabric softener, wash the lint filter in warm, soapy water and allow it to dry thoroughly before reinstalling. NOTE • NEVER operate the appliance without the lint filter in place.
  • Page 50: Troubleshooting

    Scan this QR code to quickly access the video search page on the offical LG website. On the lg.com/us home page, click on the Support menu tab to bring up the menu selections. Select Video Tutorials. Type Dryer in the search box on the new page and click the Search button.
  • Page 51: Before Calling For Service

    TROUBLESHOOTING Before Calling for Service The dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the dryer does not function properly or does not function at all, check the following before you call for service.
  • Page 52 52 TROUBLESHOOTING Problem Possible Cause & Solution The appliance will House fuse is blown, circuit breaker has tripped, or power outage has occurred. not turn on. • Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified electrician.
  • Page 53 TROUBLESHOOTING Problem Possible Cause & Solution Drying time is not Heat settings, load size, or dampness of clothing is not consistent. consistent. • The drying time for a load will vary depending on the size of the load, the type of fabrics, the wetness of the clothes and the condition of the lint filter.
  • Page 54 54 TROUBLESHOOTING Problem Possible Cause & Solution Excess static in Fabric softener is not used or is used incorrectly. clothes after drying. • Use a fabric softener or the Reduce Static option, if available, to reduce static electricity. Be sure to follow the manufacturer’s instructions. Clothes dried too long (overdried).
  • Page 55 TROUBLESHOOTING Problem Possible Cause & Solution Drum does not turn This is normal. during Steam Cycle. • The drum is turned off so that the steam vapor remains in the drum. The drum will normally turn for about 2 seconds once a minute. Cannot see steam This is normal.
  • Page 56 During Wi-Fi setup, the app is requesting a password to connect to the product (on appliance and certain phones). smartphone to Wi-Fi • Locate the network name which starts with "LG" under Settings > Networks. Note the last network. part of the network name. - If the network name looks like LGE_Appliance_XX-XX-XX, enter lge12345.
  • Page 57: Limited Warranty

    Should your LG Dryer (“Product”) fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG will, at its option, repair or replace the Product. This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only when purchased lawfully and used within the United States including U.S.
  • Page 58 Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.
  • Page 59 If you and LG are unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.
  • Page 60 60 LIMITED WARRANTY www.lg.com/us/support/repair-service/schedule-repair-continued and clicking on “Find My Model & Serial Number”). You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure.
  • Page 61 Memo...
  • Page 62 62 Memo...
  • Page 63 Memo...
  • Page 64 LG Customer Information Center For inquiries or comments, visit www.lg.com or call: U.S.A. 1-800-243-0000 1-888-542-2623 CANADA Register your product Online! www.lg.com...

This manual is also suitable for:

Dlgx89 1 seriesDlgx8901b.ableeusDlex89 0 series

Table of Contents