Download Print this page

DuFrane Littlefield Owner's Manual

Advertisement

Quick Links

Thank you and welcome!
Thank you for purchasing your new DuFrane Watches Littlefield GMT watch! From Austin, Texas, I am committed to
designing and engineering stylish pieces that will provide years of trouble-free timekeeping. This guide provides
operational instructions, as well as some best practices, for caring for your new timepiece.
Table of Contents
Operation
Setting GMT Hand
Adjusting Bracelet
Basic Care
Warranty
Operation
1- POSITION 1- unscrew crown counter clockwise, crown will gently pop out for manual winding.
2- POSITION 2- gently pull out crown one click, turning clockwise will advance the 24 Hr hand, and turning
counterclockwise will advance the date disc.
3- POSITION 3- gently pull out crown second click to set time. This halts the second's hand, also called hacking.
The Littlefield uses a Swiss Sellita SW330-1 mechanical automatic movement. An automatic movement actually winds
itself with the normal daily movements of your wrist. If your watch has sat unworn for a few days and has stopped,
The Littlefield
Owner's Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the Littlefield and is the answer not in the manual?

Questions and answers

Summary of Contents for DuFrane Littlefield

  • Page 1 Owner’s Manual Thank you and welcome! Thank you for purchasing your new DuFrane Watches Littlefield GMT watch! From Austin, Texas, I am committed to designing and engineering stylish pieces that will provide years of trouble-free timekeeping. This guide provides operational instructions, as well as some best practices, for caring for your new timepiece.
  • Page 2 (it will slightly ‘pop out’) to position 1, and gently turn the crown clockwise 15-20 turns. This will start the watch and you can then set the time and date. When fully wound, the Littlefield will run for approximately 42 hours.
  • Page 3 During normal wear, the screw bars may unscrew. During initial sizing by a reputable jeweler or if you do this yourself, it is a best practice to remove all screw pins and reinsert after a tiny drop of Loctite is applied. DuFrane is not responsible for lost pins or potential damage caused by these screw pins coming unseated.
  • Page 4 interval, then bring it in for service sooner. These are mechanical marvels. However, they rely on jewels and oils to keep friction to a minimum. And just like anything mechanical (a car, motorcycle, guitar...), maintenance needs to be performed. CONTACT Should you need to reach me for anything, please email me at howdy@dufranewatches.com www.dufranewatches.com...