Ultravation Solaris SLX-PowerPro-4-LV Installation And Owner's Manual

Note:
You must reset the service indicator light after each lamp replacement or
adding any new device. With the power on press and hold the RESET button for
10 seconds using a non-metallic implement. The LED should turn blue while the
button is depressed. Release the RESET button, and the LED should remain blue.
Warranty:
This power module (manufactured by Ultravation, Inc) is warranted for a period of 10
years after date of consumer purchase.
This warranty does not include damage to the unit from accident, misuse or improper
installation.
If this product should become defective, Ultravation will elect to repair or replace the
product free of charge. Ultravation will return repaired or replaced warranted products
pre-paid to the customer, provided that the product was delivered pre-paid.
Ultravation shall have no responsibilities for charges incurred by the customer for
installation or removal of warranted items. Liability is limited only to the replacement or
repair of this product.
This warranty gives you specific legal rights, and you may also have other rights, which
vary from state to state. All returns must be accompanied by a return authorization
number, which may be obtained by contacting Ultravation, Inc.
Ultravation, Inc.
P.O. Box 165, 212 Ideal Way, Poultney, Vermont 05764 Phone:
1-866-GO-UV-AIR (468-8247) • Fax: 802-287-9203
www.ultravation.com • info@ultravation.com
Copyright © 2024 Ultravation, Inc. Doc- DC-OM-SLXPP REV 2
Reset
Audible alarm can
be selected to be on
or off. The alarm
alerts when service
or lamp change may
be required.
Made In
USA
Ultravation
®
Installation and
Owners Manual
IAQ Power Module
SLX-PowerPro-4-LV
Supports the following accessories:
SLX-PG5T
SLX-AAL-17
SLX-AAL-12
SLX-AAL-PCO
SLX-AAL-CAT