CDM OMNIPHONE Instruction Manual

omniphONe
INSTRUCTION MANUAL
Box Content:
1 OMNIPHONE (v5.2)
1 USB charger cable
1 USB charger block
Warning:
This object produces light and may po-
tentially trigger seizures for people with
photosensitive epilepsy.
Get started in 7 steps:
1. Plug OMNIPHONE with the charger cable
and charge for a few hours.
2. Turn on OMNIPHONE by turning the right
smooth knob to the right until the click.
3. The same right smooth power knob can
be used to adjust volume, increase the vol-
ume by turning right, decrease the volume by
turning left.
4. Touch one of the pads, OMNIPHONE will
make light and sound!
5. Shuffle through different tone sets by
turning the left dented knob left or right.
6. By pressing the same left dented knob,
shuffle through different sound timbres.
7. Turn off OMNIPHONE by turning the right
smooth knob to the left until the click.
EN
Dented Knob (Tone/Timbre)
USB Connector
Mini Jack Connector
Smooth Knob (Power/Volume)
Play with 3 suggestions:
Omniphone can be used in as many ways as
you can imagine, here are three ideas to get
you started:
1. Open your hands wide and let them rest
or hover over several pads, slowly move your
hands around the instrument.
You are playing HARMONICALLY!
Extra tip: try changing the tone sets by turning the left
dented knob while playing.
2. Choose four specific pads, press these four
pads repeatedly one after the other, either in
the same order or randomly.
You are playing MELODICALLY.
Extra tip: try playing your melody faster or slower.
3. Use your fingers to tap a fast and repeating
pattern onto the pads.
You are playing RHYTHMICALLY.
Extra tip: try pressing the left dented knob while playing
to change the timbre.
Extra step: mix and match these methods or
invent your own ways to play!
cc
Pad
Shell
Base
1/2