Advertisement
Quick Links
Quick Start Guide
Getting Started
• To get started, the Flex WiFi (FLEX-WF)
requires a Flex Link Cable for various con-
nectivity options (infrared, serial, relay/
sensor). For options, see our product
list or contact an authorized dealer or
distributor.
• Power up your Flex WiFi by connecting it
to a power source with the included USB
power supply.
• Connect the appropriate Flex Link Cable
to the device's 3.5mm Flex Link port.
Connecting to WiFi
1. Join the iTachFlex SoftAP network
from your device, identified by the LED
flashing an irregular pattern and broad-
casting the MAC address (e.g., iTachFl-
ex000C1E000000).
2. Navigate to http://192.168.1.70 in a
browser.
3. Choose your WiFi network SSID. If the
SSID is not displayed, enter manually in
the field provided. Then, input the WiFi
password and join.
4. For a static IP, disable DHCP in settings
and enter your static information.
5. After joining, the unit will reboot. Recon-
nect your PC/mobile device to the same
WiFi that the Flex is now connected to.
6. Wait for the Flex to reboot (up to 60 sec-
onds), then proceed to IP discovery.
Connection with WPS
1. Hold down the side button for more than
6 seconds, but less than 12 seconds.
2. Press the WPS button on your router.
3. The LED will flash quickly, and then
once-per-second when the connection is
established.
4. Proceed to IP discovery.
Flex WiFi
Flex WiFi (FLEX-WF)
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Global Cache Flex WiFi
Summary of Contents for Global Cache Flex WiFi
- Page 1 Quick Start Guide Flex WiFi Flex WiFi (FLEX-WF) Getting Started • To get started, the Flex WiFi (FLEX-WF) requires a Flex Link Cable for various con- nectivity options (infrared, serial, relay/ sensor). For options, see our product list or contact an authorized dealer or distributor. • Power up your Flex WiFi by connecting it to a power source with the included USB power supply. • Connect the appropriate Flex Link Cable to the device’s 3.5mm Flex Link port. Connecting to WiFi 1. Join the iTachFlex SoftAP network from your device, identified by the LED flashing an irregular pattern and broad- casting the MAC address (e.g., iTachFl- ex000C1E000000). 2. Navigate to http://192.168.1.70 in a browser. 3. Choose your WiFi network SSID. If the SSID is not displayed, enter manually in the field provided. Then, input the WiFi...
- Page 2 Discovering the IP Address After the unit is connected to WiFi, use iHelp to find the Flex WiFi or look for the unit’s MAC ad- dress in your router’s device list. An IP scanner can also be used to find the assigned IP. Device Configuration • Access device settings by entering the IP address into a browser. • To configure the Flex Link cable settings, choose the type of cable connected and configure as necessary. Save your changes. Factory Default Settings To reset the Flex WiFi to factory default settings, which resets the IP address to 192.168.1.70 and the device to SoftAP mode, hold down the side button for a full 12 sec- onds. The LED indicator will blink very rapidly to signal the reset. Release the button and the device will reboot within one minute. The LED flash pattern will blink in an irregular pattern after reset is complete. For detailed info on configuring and using the Flex and Flex Link Cables, consult the User Guide: Flex and Flex Link Cables at www.globalcache.com/docs. This device complies with Part 15 of FCC rules and with ICES-003 of Industry Canada.
Need help?
Do you have a question about the Flex WiFi and is the answer not in the manual?
Questions and answers