Adding Memory To The Printer; Preparing To Install A Simm - Kodak 8650R THERMAL PRINTER Operator's Manual

Appendix C Customizing the printer

Adding memory to the printer

You can purchase and install SIMMs to increase memory to a total of 64
MB.
NOTE:
The benefits of having additional memory are as follows:
•
You may increase the speed at which images are processed.
•
You can download more fonts with PostScript jobs.
•
Additional memory allows simultaneous processing and printing of
more and/or larger jobs (that is, it increases the possible number of
prints per hour). For example, operating in raster mode with 64 MB of
memory lets you print one 9 1/2 x 14 job and process a second job of
the same size. With less memory, only smaller jobs can be processed
and printed.
The SIMMs should be 16 MB (in 4MB X 32 bit configuration), 72–pin,
symmetrical, 70 nanosecond SIMMs. The following cards fit these
specifications:
•
Mitsubishi—Part No. MH4M32BNXJ-7
•
Toshiba—Part No. THM324000s-70
•
Motorola—Part No. MCM32400s70

Preparing to install a SIMM

To prepare to install a SIMM.
1. Turn Off and unplug the printer.
C-8
The KODAK DIGITAL SCIENCE 8650 PS / 48 MB / CMYK
Color Printer comes with 48 MB of factory-installed memory.
October 1997