U-Line S-25457 Instructions

S-25457
TRAFFIC CONE
CHAIN CONNECTOR
1. Place unit onto a traffic cone. Press down firmly
on unit with both hands to ensure that it is securely
attached. (See Figure 1)
Figure 1
2. Connect one end of the plastic chain to one of
the C-Hooks. (See Figure 2)
Figure 2
3. Connect opposite end of plastic chain to a C-Hook
attached to an adjacent traffic cone.
NOTE: Ensure the chain has enouygh slack
to eliminate any leaning or tipping of the
traffic cones.
PAGE 1 OF 3
1-800-295-5510
uline.com
INSTRUCTIONS
4. Repeat steps 1-3 until designated darea is marked off.
5. To leave chain in one continuous piece, wrap
leftover chain around the outside of the cone
attaching to an adjacent C-Hook. (See Figure 3)
6. To cut chain to desired length, use a pair of
diagonal cutters or side cutters.
Figure 3
0523 IS-25457