Geutebruck MBeg+ Instructions For Use

About this device
Intended use
The MBeg+ is a multifunctional operating device for
controlling a security surveillance system. The functions
include camera playback, PTZ control and processing of
alarm events. The device is operated v i a touch screen
or keypad. Comprehensive camera and video control is
possible via the MBeg+.
The MBeg+ operating device may only be used indoors.
About these instructions for use
These operating instructions contain important
information for the safe and proper commissioning and
use of the MBeg+ multifunction control unit.
The multifunction control unit has been developed and
manufactured in accordance with the generally
recognized rules of technology and in compliance with
recognized applicable standards and guidelines.
Observe the safety instructions in this manual to avoid
personal injury and damage to property.
◼
Read these instructions thoroughly and
completely before working with the MBeg+.
◼ Keep the instructions in a place where they
are accessible to all users at all times.
◼ Always pass the multifunction control unit on
to third parties together with the instructions
for use.
Validity of the documentation
This documentation applies to the MBeg+ multifunction
control unit.
These instructions correspond to the technical status of
the device at the time of publication. Errors and
omissions excepted.
GEUTEBRÜCK reserves the right to make changes
without prior notice.
EU Declaration of Conformity
This appliance complies with the requirements of the
following EU directives:
◼
Electromagnetic Compatibility Directive (EMC)
2014/30/EU
◼ Low Voltage Directive 2014/35/EU
◼ RoHS Directive 2011/65/EU
The currently valid edition of the EU
Declaration of Conformity can be found
here:
https://t1p.de/5qe1c
MBeg+ Quick Guide EN 7.77041 15.03.2024
Copyright © 2024 Geutebrück. All rights reserved.
Transport and storage conditions:
The device is shipped from the factory in a shipping box
with a special cushion packing. If possible, always use
the original packaging.
◼ We recommend always using pallets f o r
storing and forwarding the appliances.
◼ Temperature: -25°C to +55°C
◼ Relative humidity: 10% to 90%
(without condensation)
Disposal
Dispose of the device properly. Careless disposal of the
appliance can lead to environmental pollution.
This symbol on the product or the
product packaging i n d i c a t e s that
the product must not be treated as
household waste in accordance with
Directive WEEE II Directive
2012/19/EU.
It must be handed in at the appropriate collection points
for the recycling of electrical and electronic waste.
Alternatively, Geutebrück grants the end customer the
option of returning the delivered hardware to Geutebrück
for disposal at the end of its service life. The standard
RMA procedure of Geutebrück GmbH shall be used to
process the return shipment.
Conformity with standards is confirmed by written
declarations from our suppliers. This ensures that
potential traces of restricted substances are below the
maximum permitted levels in accordance with EU
Directive 2011/65/EU or are excluded due to their use.
G-ST Software
G-ST Software Online Documentation
The installation instructions with information on how
to install or set up the individual software components
can be found here:
G-Core
Video Management Software
Order No. 3.06750
https://manuals.geutebrueck.com/
G-SIM
Security Information Management
Order No. 3.06135
https://manuals.geutebrueck.com/
G-Health
Monitoring software
Order No. 3.06520
https://manuals.geutebrueck.com/
MBeg+
Multifunctional Control Unit
Instructions for use
MBeg+ (0.50700)
User Manual MBeg+
A user manual with a description of the device and additional information on its use can be found here:
https://shop.geutebrueck.com
Installation Manual G-ST Software
Installation manual with information on how to install the individual software components can be found here:
https://manuals.geutebrueck.com/