1. Manuals
  2. Brands
  3. Alasta Manuals
  4. Weather Station
  5. P3
  6. User manual

Alasta P3 User Manual

Hide thumbs

Advertisement

Table of Contents

P3 Weather station
user's manual
Thank you for purchasing our mirror.
We make all our products with the greatest
attention to details. We are one of the leading
brands that produce mirrors in Europe, so
you can be sure you get the highest
quality product. Use your mirror
according to its absolute purpose
by following the descriptions,
conditions and provided
information in this
manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P3 and is the answer not in the manual?

Questions and answers

Related Manuals for Alasta P3

Summary of Contents for Alasta P3

  • Page 1 P3 Weather station user’s manual Thank you for purchasing our mirror. We make all our products with the greatest attention to details. We are one of the leading brands that produce mirrors in Europe, so you can be sure you get the highest quality product.
  • Page 2 Front Weather Weather trend forecast icons indicator Indoor Outdoor temperature temperature Outdoor transmitter Indoor humidity Outdoor humidity Alarm 1/2 Day / month Time Rear Snooze / Light Up / CHANNEL Set / Alarm set Alarm on / off Air pressure memory display °C/°F/ Down / WAVE Reset...

  • Page 3: Feature List

    Feature list • Atomic time / date sets itself using the DCF radio signal; • Alarm 1 and alarm 2; • Programmable Snooze; • Dimmer for nighttime viewing; • Coloured forecast: Sunny, Partly Cloudy, Cloudy, Rainy, Stormy; • 12 hour forecast based on changing air pressure; •...

  • Page 4: Quick Setup

    • Long transmitting distance; • Nearby mountains and valleys; • Among tall buildings; • Near railway, high voltage cable, highway, airport etc.; • Near construction site; • Inside concrete buildings; • Near electrical appliances; • Neat computers and TV’s; • Inside moving vehicles; •...
  • Page 5 DCF radio time signal Reception and indication After your clock receives the outdoor temperature and humidity, it starts to receive the DCF time signal. Receiving DCF signal Successful reception Unsuccessful reception The icon is flashing The icon is lit all the time The icon disappears Attention: When your clock is receiving radio controlled time signal, all buttons except the snooze / light buton do not function.
  • Page 6 1. Press and hold for 2 seconds. Time digits change to „00”. Press ▲/▼ buttons to set the time zone. 2. Then press again. Time digits change to „24h” and flash. Press ▲/▼ buttons to select „12h” time format. When 12h time format is selected, PM indicator will be displayed.

  • Page 7: Alarm Time Setup

    Alarm time setup 1. Press once, time digits change to alarm time digits „6:00” and „A1”. Then press and hold for 2 seconds. The alarm hour digits flash. Press ▲/▼ buttons to set the hours of your desired alarm time. 2.

  • Page 8: Weather Forecast

    Your weather station has a built-in Weather barometric sensor which measures the change of the air pressure over time. Your forecast weather station takes around 12 hours to gather and average air-pressure readings to provide a weather forecast for next 12 hours.
  • Page 9 Displaying air Pressure readout Press and hold MEM/inHg until the calendar display shows the air pressure readout in hPa. Press and hold MEM/inHg again to revert back to calendar display. To read maximum / minimum in / out temperatures and humidities Press the MEM/inHg to view the maximum indoor / outdoor temperatures and humidities records with „MAX”...

  • Page 10: Care And Maintenance

    2. Press and hold ▲/CHANNEL until the icon blinks. Your weather station is searching for the signal of another outdoor transmitter at Channel 2. 3. Slide open the battery door of your second transmitter. Slide the switch to the middle position marked with 2, then insert two AAA batteries into the battery compartment by observing the correct +/- polarity.

  • Page 11: Problems And Solutions

    In case your weather station clock shows Problems irrelevant information or digits, it maybe and Solutions affected by electrostatic discharge or interferences from other devices. Use a sharp object to press RESET. Your unit will be reset to default settings and you need to set the time, calendar and alarm time again.

  • Page 12: Technical Specifications

    Technical specifications Temperature range Indoor 0°C to +50°C (+32°F to +122°F) Outdoor -50°C to +70°C (-58°F to +158°F) HH.H – The upper limit of the temperature range was exceeded. LL.L – The lower limit of the temperature range was exceeded. Accuracy of temperature +/- 1°C Humidity range Indoor / outdoor...

Table of Contents