The fan may only be operated if it is in a safe condition. This means that all protective and safety systems (e.g. electrical motor protection, safety screen and shatter guard, where fitted) are in place and fully functional and that the fan is integrated into the system as specified in the project. MIETZSCH GmbH Lufttechnik Dresden www.mietzsch.de oi_vrk (05/24)
Measure the current consumption of the motor after commissioning and check it against the value given on the motor's type plate. If the current consumption is too high, check that the direction of rotation is correct. MIETZSCH GmbH Lufttechnik Dresden www.mietzsch.de oi_vrk (05/24)
Caution! Failure to observe the instructions may result in bearing damage, which could lead to motor failure! Wiring diagram frequency inverter repair switch motor Frequenzumrichter Reparaturschalter Motor Ventilator power Netz grid earthing Erdung MIETZSCH GmbH Lufttechnik Dresden www.mietzsch.de oi_vrk (05/24)
Abnormal noises, uneven running and excessive motor current often indicate fan defects that must be remedied without delay. Contact the manufacturer if this occurs during the warranty period. Unauthorised measures and modifications void the warranty. MIETZSCH GmbH Lufttechnik Dresden www.mietzsch.de oi_vrk (05/24)
Renew the hub fastener Renew hub caps that were glued or welded on Pay attention to the mounting position of the drive Check that the impeller is running freely and non-contacting MIETZSCH GmbH Lufttechnik Dresden www.mietzsch.de oi_vrk (05/24)
Repairs of explosion-proof fans must be carried out by the manufacturer or in consultation with the manufacturer. 7. Waste disposal MIETZSCH fans are built to last. Thus disposal issues only crop up after many years of operation. The individual components are not regarded as hazardous waste according to current legislation.
Need help?
Do you have a question about the VRK Series and is the answer not in the manual?
Questions and answers