Table of Contents
Advertisement
Quick Links
®
Serial Communications
COML 2232F
CompactFlash+ 2-Port RS-232
Serial Interface Card
USER'S MANUAL
VER. 1.1 • JUL 2006
No part of this manual may be reproduced without permission
®
CyberResearch
, Inc.
www.cyberresearch.com
25 Business Park Dr., Branford, CT 06405 USA
203-483-8815 (9am to 5pm EST) FAX: 203-483-9024
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for CyberResearch COML 2232F
- Page 1 ® Serial Communications COML 2232F CompactFlash+ 2-Port RS-232 Serial Interface Card USER’S MANUAL VER. 1.1 • JUL 2006 No part of this manual may be reproduced without permission ® CyberResearch , Inc. www.cyberresearch.com 25 Business Park Dr., Branford, CT 06405 USA...
- Page 5 CyberResearch, Inc. In no event will CyberResearch, Inc. be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of or inability to use the product or documentation, even if advised of the possibility of such damages.
- Page 6 ® COML 2232F CyberResearch Serial Communications Intentionally Blank ©Copyright 2006 CyberResearch, Inc.
-
Page 8: Table Of Contents
COML 2232F Table of Contents OVERVIEW... 1 ABOUT THE COML 2232F ... 2 INSTALLING THE COML 2232F ... 3 3.1 W 95, 98, 98SE, M INDOWS 3.2 W CE, P PC... 3 INDOWS OCKET HARDWARE SPECIFICATION... 4 4.1 PINOUT... 4 4.2 ELECTRICAL ... -
Page 9: Overview
® CyberResearch Serial Communications Overview The COML 2232F card is an isolated dual-port RS-232 CompactFlash serial card with the following features: Type II CompactFlash form factor for CF+ equipped PDAs, Handheld PCs, laptops, etc. SeaCOM software provided for Windows 95, 98, 98SE, Me, 2000, and XP... -
Page 10: About The Coml 2232F
PC or PDA. The CF+ specification extends the earlier memory-only CompactFlash interface to allow I/O devices and extra power for the card. The COML 2232F is an I/O type device and requires a CF+ capable slot. -
Page 11: Installing The Coml 2232F
Installing the COML 2232F 3.1 Windows 95, 98, 98SE, Me, 2000, XP You will first need to install SeaCOM prior to using the COML 2232F. Installing the supplied SeaCOM software that comes with your product will copy the necessary files into the proper Windows folders. -
Page 12: Hardware Specification
Hardware Specification 4.1 PINOUT The COML 2232F is supplied with a 12” Y-cable that terminates with two DB-9M connectors with female jackscrews (to match the port at the back of a PC). The pinout below applies to the DB-9M connectors on the supplied cable. “Port1” and “Port2” is marked on the cables. -
Page 13: Electrical
TX and RTS respectively to prevent them from floating 35mA typical @ 3.3V 15g typical (0.352 oz.) 36.4mm x 42.8mm x 5.0 mm overall (1.43” x 1.68” x 0.13”) <80% R.H. (non-condensing) 0-50°C ambient (32-122°F) P: (203) 483-8815; F: (203) 483-9024 COML 2232F www.cyberresearch.com... -
Page 14: Troubleshooting
The I/O addresses used by these adapters, as well as the IRQ (if any) should be identified. Configure your CyberResearch adapter so that there is no conflict with currently installed adapters. No two adapters can occupy the same I/O space. -
Page 15: Product Service
Signal connections and programming are the two most common sources of difficulty. CyberResearch support personnel can help you solve these problems, especially if you are prepared for the call. - Page 16 ® COML 2232F CyberResearch Serial Communications Intentionally Blank ©Copyright 2006 CyberResearch, Inc.
-
Page 17: Warranty
CyberResearch, Inc. will, at its option, repair or replace the defective item under the terms of this warranty, subject to the provisions and specific exclusions listed herein. - Page 18 ® COML 2232F CyberResearch Serial Communications Intentionally Blank ©Copyright 2006 CyberResearch, Inc.
- Page 20 CyberResearch, Inc. 25 Business Park Drive Branford, CT 06405 USA P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.com...
Need help?
Do you have a question about the COML 2232F and is the answer not in the manual?
Questions and answers