Subscribe to Our Youtube Channel
Related Manuals for ESP T&D PICOUP 50
Summary of Contents for ESP T&D PICOUP 50
- Page 1 User manual INTEGRATED HYDRAULIC SAFETY POWER CABLES SPIKER AND CUTTER PICOUP 50 Ref. : PICOUP50 PICOUP 65 Ref. : PICOUP65 PICOUP 80 Ref. : PICOUP80 Created: 22/062023 Modified: Version: 01 Page 1/15...
- Page 2 PREAMBLE This product, marketed under the FAMECA brand, is manufactured by the company MOS INDUSTRIE (Centr'Alp business park - 355 rue Aristide Bergès - 38340 VOREPPE - France) which bears the legal responsibilities with regard to the regulatory provisions relating to this product.
- Page 3 D. TOOL STRENGTHS - USER SAFETY Elimination of the risk of oil leakage by integrating the electro-hydraulic pump inside the tool. Remoteness of the operator: activation only remotely by the remote control. - EASE OF USE FOR THE OPERATOR The PICOUP allows the operator to carry out his spiking and cutting operations without any other equipment than that provided in the carrying case.
-
Page 4: Technical Characteristics
F. TECHNICAL CHARACTERISTICS PICOUP50 PICOUP65 PICOUP80 Characteristics of the cables to be cut: Copper conductors (overall diameter mm²) 4 x 185 + 150 mm² / 3x150 + 95 / 1x300 3x150 + 95 / 1x300 1 x 300 mm² Aluminum conductors (overall diameter mm²) 3 x 240 + 120 mm²... - Page 5 G. TOOL COMPOSITION ON/OFF button with LED Battery Housing Integrated spike Decompression Retaining strap on button cable Earthing cable with clamping vice Ground rod Hanging strap Explosion-proof tarpaulin Remote control unit Page 5/15...
- Page 6 Left green LED (cut indication) Right blue LED (connection status with the tool) Central orange LED (blinks when battery charge is low) Remote control start button and remote tool activation button NOTE: If the remote control unit and the tool are unpaired, to re-pair: - Take the battery out of the tool - Remove the battery from the remote control - Reinsert the battery into the tool while pressing the ON button for 10 seconds.
-
Page 7: Cutting Capacity
H. CUTTING CAPACITY Overall Flat or round wire Maximum total cross-section of conductors Steel strip armature diameter amor 3 x 240 + 120 mm² / 1 x 630 mm² Alu Thickness up to Thickness up to Up to 50mm 4 x 185 + 150 mm² / 1 x 300 mm² Cuivre 2 mm 2,4 mm 3x240 + 120 mass / 1x630mm²... - Page 8 IV. EXECUTION: SPIKING + CUTTING - The connection LED flashes = tool connected and ready to cut - Position yourself at least 8 meters from the job site area with the remote control. - Start the cutting cycle by pressing the start button (Green button).
-
Page 9: Operating Mode
J. OPERATING MODE Page 9/15... -
Page 10: Maintenance
K. MAINTENANCE The PICOUP, SAFETY equipment must be regularly inspected, in order to guarantee operators the constant maintenance of its level of reliability. Only MOS Industrie is authorized to provide MAINTENANCE for your PICOUP. There are companies approved for foreign countries. During this intervention, the tool is completely disassembled. - Page 11 L. WARRANTY: ELECTRO-HYDRAULIC MATERIAL Purpose: This document describes all the terms of the applicable warranty for the tools of the PICOUP range. It supplements our current GCS. 1. Application domain: Picoup 50/65/80 / Picoup EXP 240 / Picoup FR 240 / Picoup EXP 300 / Picoup EXP 350 / Picoup 2/ Picoup 250/ Picoup 400 / HYDROPIC INT.
- Page 12 Bad use: - Malfunctions related to improper use: non-compliant electrical connections, striking mechanical parts with a hammer (blade, counter-blade, blade guide), non-compliance with the operating mode, use of a battery or charger other than those provided by MOS Industrie, - Use not in accordance with the description of the operating mode - Repair or replacement of parts due to a proven lack of maintenance of the equipment.
-
Page 13: Material List
M. MATERIAL LIST 1 PICOUP cable spike and cutter 1 User Manual (This document) 1 remote control 1 carrying case 2 Battery 18V 4Ah 1 braid of MALT METABO 1 ground stake ... - Page 14 PRESSURE SHETT CUSTOMERS: □ □ □ Tools Type: PICOUP 50 PICOUP 65 PICOUP 80 Number: Numb. orders: EXPORT PICTURE Test Tool (no in - Pressure sensor charge) (Keep the curve SETTING with the control PRESSURE plug in the tool 720 bars mini folder) (during 15 seconds)
- Page 15 Page 15/15...
Need help?
Do you have a question about the T&D PICOUP 50 and is the answer not in the manual?
Questions and answers