easycomposites DVP EC5 Setup & Operation

easycomposites
DVP VACUUM PUMP
SETUP, OPERATION & WARRANTY
DON'T DAMAGE YOUR DVP VACUUM PUMP!
Damage caused by improper use is NOT covered under warranty
Your DVP EC5 vacuum pump has been manufactured to the highest standards and should provide many years of
reliable service when used and maintained correctly. However, some common user errors can quickly damage
the pump and would not be covered under warranty.
Avoid user damage to your pump by always following these essential operating instructions:
DUST & FIBRES
Always use an inline filter to prevent dust, dirt and
fragments of fibre reinforcement from entering the
pump. Failure to do so will increase wear, resulting in
reduced performance. Filters should be checked and
changed regularly.
Please continue to read for full setup and operating instructions...
VERSION 2.0
RESIN
The most common cause of damage to vacuum pumps
in composites is ingestion of resin, which can occur in a
single major event or can accumulate over time. Always
use an inline catchpot and filter when using the pump
with liquid resin.
MODEL
EC5
1