Questions? • Contact your dealer Thank you for choosing our Zebra Shade for your Home or Office. We are confident that you will find these zebra shades to be of superior quality and value, compared to other shades available .
SUGGESTED TOOLS (not included) INCLUDED IN YOUR PACKAGE DRILL SCREWDRIVER Cordless Zebra Shade 1/16" drill bit, Flat blade, Phillips, or and 1/4" 1/4" hex driver hex driver LEVEL TAPE MEASURE PENCIL LADDER THINGS TO CONSIDER BEFORE YOU BEGIN YOUR INSTALLATION Your new shade is custom made to your specifications from the finest fabrics available.
INSTALLING SHADE MOUNTING BRACKETS INTO THE BRACKETS Install each Spring Bracket with 2 screws. Using 2 screws per Spring Bracket, fasten the Slide headrail into the brackets on an angled up brackets to the mounting surface. Always use 2 motion and push headrail to compress the springs. screws.
IMPORTANT MOUNTING INFORMATION The Zebra Shade cannot be mounted in the areas marked in red below. The mounting bracket CANNOT clip to these areas. Forcing the bracket in these areas could cause damage to the blind that IS NOT covered by warranty.
OPERATING THE SHADE • To close the shade, gently pull the bottom rail down to the desired height. • To open shade, gently push bottom rail all the way to the headrail or to desired height. Page 4...
WARNING Young children STRANGLE in cord and bead chain loops and in the loop(s) above the cord connector. They can also wrap cords around their necks STRANGLE. • Always keep cords and bead chains out of children's reach. • Move cribs, playpens, and other furniture away from cords and bead chains.
Need help?
Do you have a question about the ZEBRA SHADE and is the answer not in the manual?
Questions and answers