Advertisement
Quick Links
Advertisement
Summary of Contents for Hydropath HYDROKNCT
- Page 1 HYDROKNCT INSTALLATION...
-
Page 2: Ports And Connectors
HYDROKNCT INSTALATION INTRODUCTION Setup of the HYDROKNCT is straightforward. Once connected to the internet and powered on the device will automatically connect to the HYDOPATH Care software and enable monitoring immediately. PORTS AND CONNECTORS The HYDROKNCT has a number of connection options. These are shown in the diagrams below. -
Page 3: Connection Ports
CONNECTIONS • A schematic of how to connect the Hydroflow to the HYDROKNCT is shown above, with a photograph of the connection shown below. RJ45 Internet HYDROKNCT power Connection HydroFLOW Unit supply Junction Monitoring Extension Lead • Connect the BMS leads from the junction box COM and DI1 ports of the Net Device. -
Page 5: Technical Specification
TECHNICAL SPECIFICATION Hydroknct is an IO product for networks that has six channels for detecting dry and wet nodes, four for relay output (COM and NO), four for analogue detection (current 420mA) and one for transparent transmission through a serial port. - Page 6 Number of interfaces Standard AI*4, COM *2 Examination range 4 ~ 20mA Number of interfaces 6 switches Standard DI *6, COM *1 Detection range 50~50v for high and 0~2 for low Number of interfaces 2 Pulse count Standard PI*2, COM *1 Examination range 10000Hz...
Need help?
Do you have a question about the HYDROKNCT and is the answer not in the manual?
Questions and answers