ARDEN & BROOKER Butler Manual

T A L K I N G W A T C H E S
Product Codes: DL02030005 - Butler | DL02030006 - Clifton
Scan me on your phone camera to
learn more about your product.
Sleep Mode
When opening the box for the first time, the watch may be in SLEEP MODE.
(Watch shows 1 O'CLOCK)
1. Press & hold the 4 O'CLOCK and 2 O'CLOCK buttons simultaneously
for five seconds to exit SLEEP MODE
The watch hands will automatically rotate to the correct time.
To re-enter SLEEP MODE, repeat step 1.
Setting the Alarm
1. Press & hold the 4 O'CLOCK button until the watch says, SET ALARM,
PRESS 2 O'CLOCK BUTTON TO SET.
2. Press the 2 O'CLOCK button.
The watch will respond PRESS 2 O'CLOCK BUTTON TO SET HOUR,
4 O'CLOCK BUTTON TO CONFIRM.
3. Press the 2 O'CLOCK button to cycle through the hours
4. Press the 4 O'CLOCK button to confirm the alarm hour.
The watch will respond PRESS 2 O'CLOCK BUTTON TO SET MINUTE,
4 O'CLOCK BUTTON TO CONFIRM.
5. Press the 2 O'CLOCK button to cycle through the minutes
6. Press the 4 O'CLOCK button to confirm the alarm minute.
The watch will respond with the set alarm time.
NOTICE: Setting an alarm will sound the siren at the same time every day.
To turn off the alarm, follow "ALARM ON/OFF" Instructions.
The alarm siren will sound for 30 seconds. To turn off the alarm siren,
press any button.
Button Functions
2 O'CLOCK
CROWN
4 O'CLOCK
Turn Alarm (ON / OFF)
1. Press & hold the 4 O'CLOCK button until the watch says, SET ALARM,
PRESS 2 O'CLOCK BUTTON TO SET.
2. Press the 4 O'CLOCK button.
The watch will respond ALARM ON/OFF, PRESS 2 O'CLOCK
BUTTON TO SET.
3. Press the 2 O'CLOCK button
The watch will respond PRESS 2 O'CLOCK BUTTON TO ON OR OFF,
4 O'CLOCK BUTTON TO CONFIRM
4. Press the 2 O'CLOCK to toggle ON/OFF the alarm.
5. Press the 4 O'CLOCK button to confirm ON/OFF status.
The watch will respond CONFIRM.
Turn Hourly Announcement (ON / OFF)
1. Press & hold the 4 O'CLOCK button until the watch says, SET ALARM,
PRESS 2 O'CLOCK BUTTON TO SET.
2. Press the 4 O'CLOCK button twice.
The watch will respond CHIME ON/OFF, PRESS 2 O'CLOCK BUTTON
TO SET.
3. Press the 2 O'CLOCK button.
The watch will respond PRESS 2 O'CLOCK BUTTON TO ON OR OFF,
4 O'CLOCK BUTTON TO CONFIRM.
4. Press the 2 O'CLOCK button to toggle ON/OFF the Hourly
Announcement.
5. Press the 4 O'CLOCK button to confirm ON/OFF status.
The watch will respond CONFIRM.
2 O'CLOCK BUTTON
- Press the button once for spoken HOUR & MINUTE
- Press the button twice for spoken CALENDAR
- Press the button three times for spoken RECEPTION STATUS
4 O'CLOCK BUTTON
- Press the button once for spoken ALARM TIME & ON/OFF STATUS
CROWN
- Use to manually reset watch hands to 12 O'CLOCK position
NOTICE: When the Hourly Announcement is turned [ON], the watch will
announce the hour, every hour from 6AM to 10PM.
Manually Set Region
The watch region can be manually set when there is no signal.
1. Press & hold the 4 O'CLOCK button until the watch says, SET ALARM,
PRESS 2 O'CLOCK BUTTON TO SET.
2. Press the 4 O'CLOCK button three times.
The watch will respond TO SELECT COUNTRY OR REGION, PRESS 2
O'CLOCK BUTTON TO SET.
3. Press the 2 O'CLOCK button.
The watch will respond PRESS 2 O'CLOCK BUTTON TO SET, 4 O'CLOCK
BUTTON TO CONFIRM.
4. Press the 2 O'CLOCK button to cycle through COUNTRIES & REGIONS.
5. Press the 4 O'CLOCK button to confirm.