Page 1
FLAMMABLE WASTE TRAP Installation, Operation, & Maintenance Guide OVERVIEW Striem Flammable Waste Trap model FWT-35 is a polyethylene flammable waste trap intended for above or below-grade installation. It is designed to separate insoluble flammable liquids and solids from wastewater. OPERATION Contaminated wastewater enters through the inlet connection.
Page 2
Ensure the drain lines and diffuser are cleared of all debris in the presence of slow drainage. Effluent flow fouled with free flammable liquids may indicate the FWT-35 has exceeded the maximum flammable liquid capacity. In the presence of flammable liquids in the effluent flow, maintain the unit immediately.
Page 3
Concrete slab www.striemco.com Striem Bio Basins are not to be installed in any other manner except as shown. Consult local PROPRIETARY AND CONFIDENTIAL codes for separate trapping requirements, cleanout locations and additional installation instructions. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF STRIEM, LLC.
Need help?
Do you have a question about the FWT-35 and is the answer not in the manual?
Questions and answers