Scotty 1015 Assembly Instructions

FISHING & MARINE PRODUCTS
2065 Henry Ave West,
Sidney, B.C. Canada V8L 5Z6
T: (250) 656-8102 F: (250) 385-6588
www.scotty.com
Assembly Instructions for
No. 1015 SIDE MOUNT BRACKET
1. Place your regular deck mount bracket (the
one your Downrigger is equipped with, the
No.1010) over the four holes and fix in place with
the machine screws provided.
This also secures the 5/16"
stainless right-angled section in
place.
2. Insert stainless steel loop
section into bottom pocket and
lock into place with locking lever.
3. Locate the four fastening holes for the
bottom pocket section by resting the upper
section on the gunwale and marking the
position of the holes.
4. It is best to place a piece of plywood
inside the gunwale to help distribute the load.
5. Mount the bracket by bolting through the
gunwale and plywood.
10152003.cdr