Summary of Contents for Streifeneder ortho.production 168P75
- Page 1 168P75 168P76/H Deep-Drawing Frame / Rack 168P75 Deep-Drawing Frame 168P76/H Rack, height adjustable for Deep-Drawing Frame 168P75 Instruction Manual 1/12...
- Page 2 2/12...
-
Page 3: Table Of Contents
Adjustment and function of the Rack 168P76/H for deep-drawing frames ............. 5 – 6 Adjustment of 3 variable total heights ......6 Function and description of Deep-Drawing Frame 168P75 ..7 Accessories ................8 General information ..............8 Entsorgung ................8 Legal Warranty and Liability ............ -
Page 4: Introduction
T piece with bores Base rack with threaded bores 4 screws For use with many common heating cabinets and infrared-ovens. The Deep-Drawing / Clamping Frame 168P75 and the Rack 168P76/H are temperature resistant up to 250 °C / 482 °F. 4/12... -
Page 5: Adjustment And Function Of The Rack 168P76/H For Deep-Drawing Frames
3 Adjustment and function of the Rack 168P76/H for deep-drawing frames The base rack 168P76/H for the deep-drawing frame consists of following components: T-piece with bores Base rack with threaded bores 5/12... -
Page 6: Adjustment Of 3 Variable Total Heights
3.1 Adjustment of 3 variable total heights Following describes the adjustment of the deep-drawing frame. 1. highest level: 2. medium level: total height 387 mm total height 307 mm T-piece Base rack T-piece Base rack bores 3 + 4 thread 1 + 2 bores 2 + 4 thread 2 + 3 3. -
Page 7: Function And Description Of Deep-Drawing Frame 168P75
4 Function and description of Deep-Drawing Frame 168P75 Position the bottom part with the flat side up. Put a Non-stick Paperboard Frame onto the deep-drawing frame. This prevents too much heat at the edge of the inserted plastic sheet. Furthermore, the plastic sheet can be removed easier from the frame after deep-drawing. -
Page 8: Accessories
Non-stick Paperboard Frame.for Deep-Drawing / Clamping Frame 168P75 Dimensions: 40 x 40 cm Packing unit: 20 pcs. Item-Nr.: 168P75/S Deep-Drawing frame bottom part (integral part for deep-drawing / clamping frame 168P75), suitable for deep-drawing of smaller models! Material: Aluminum Diameter: 260 mm Material thickness:... -
Page 9: Legal Warranty And Liability
Legal Warranty and Liability For detailed information about our „Legal Warranty and Liability“ please see our general terms of sales and policies at: www.streifeneder.com/op/general-terms-and-conditions. 9/12... - Page 10 10/12...
- Page 11 11/12...
- Page 12 © copyright Streifeneder ortho.production 168P75-76/GGB V001 2023-05 Streifeneder ortho.production GmbH Moosfeldstraße 10 · 82275 Emmering/Germany T +49 8141 6106-0 · F +49 8141 6106-50 office@streifeneder.de · www.streifeneder.de/op...
Need help?
Do you have a question about the 168P75 and is the answer not in the manual?
Questions and answers