Advertisement
Quick Links
Advertisement
Related Manuals for Prestel MN-15-17-19-22
Summary of Contents for Prestel MN-15-17-19-22
- Page 1 Prestel MN-15-17-19-22 Motorized Retractable Monitor +motorized MIC USER MANUAL...
- Page 2 User’s Manual of LCD Monitor Lift （LCD Monitor Lift with FHD Screen & Motorized Microphone ) Welcome to use our Boente LCD monitor lift, please read the manual seriously before used. Items List: 1, LCD monitor lift with FHD screen(or with microphone) 1 pcs 2, Power line 1 pcs 3, Remote control 1 pcs 4, XLR cable 1 pcs Kindly contact with us if missed above items.
- Page 3 Product Size: Model No. Size (inch) Panel Size Case Size Monitor Size (A*B) mm (a*b*c) mm (D*E) mm 15.6 15.6 615*80 602*71*730 377*238 17.3 17.3 655*80 643*71*730 418*259 18.5 18.5 680*80 667*71*730 488*280 21.5 21.5 765*80 752*71*730 528*327 Model No. 15.6 17.3 18.5...
- Page 4 HDMI+RS232 HDMI+RS232 HDMI+RS232 HDMI+RS232 Interface I/O+USB+XRL I/O+USB+XRL I/O+USB+XRL I/O+USB+XRL Voltage 110V,220V,240V 110V,220V,240V 110V,220V,240V 110V,220V,240V Power 20~25W 20~25W 20~25W 20~25W Microphone Automatic straighten microphone up function Feature Running Way Tube motor with rack driving Control Way Touch switch/wireless remote/rs232 I/O central control screen + microphone motorized Lift Feature Notes: monitor &...
-
Page 5: Installation
Name Function Power port For power connecting Indicator light Machine working indicator RS232 For central control connecting USB port Top panel USB connecting HDMI HDMI connect by screen XRL port For Microphone input Another USB port For touch screen connecting Installation:... - Page 6 1, Confirm the installation place on the table, make the cut out size based on real product or drawing. 2, Charge the power to confirm the LCD monitor lift is workable. 3, Put the LCD monitor lift into the hole of the table carefully 4, Connect all wires which are necessary.
- Page 7 3, Use pan to click twice of “login” button (on the back middle of remote control) in 5 seconds 4, The indicator light of machine stop flickering. 5, Setting the signal succeed , press the up/down/stop of remote control to test working or not. Cancel signal of remote control 1, Turn the LCD monitor lift on, press the STOP button in 2-3 seconds.
- Page 8 ②Set up RS232 baud rate 2400/9600 data length parity checking stop bit ③Central Control Code There is a acquiescent hex code which could control fully up or down: FF 10 11 00 DD FF 10 11 00 DD FF 10 11 00 DD FF 10 11 00 DD ----fully up FF 10 11 00 EE ………….(as same as above, repeat 4 or 5 times) ------fully down FF 10 11 00 CC ……….(as same as above, repeat 4 or 5 times) ------fully stop ④Set up new code...
- Page 9 FF 10 11 00 EE……. (Repeat 5 times)………. down FF 10 11 00 CC…….. (Repeat 5 times)………. down Clear up the control code: Press UP and STOP button on the touch control panel at the same time, the indicator light of machine will flicker from slow to fast.
- Page 10 The screen is No signal Check the HDMI/VGA cable is connected & tight or not. The touch screen could not be touch Check the USB cable is connected & tight or not. Touch screen is automatic identification for windows 7,8 by connecting with USB.
Need help?
Do you have a question about the MN-15-17-19-22 and is the answer not in the manual?
Questions and answers