Related Manuals for Siro Lasertec SL10
Summary of Contents for Siro Lasertec SL10
- Page 1 Quick Start SL10 1. Unboxing Unpack the SL10 and place it on a stable table on which the back can be easily reached.
- Page 2 Plug in the main plug and connect the foot switch at the point indicated on the back. Now turn on the SL10 using the key switch. Please wait until the laser finished booting and you can see a working page.
- Page 3 To start the water feed, press the “Add Water ON” button. The process stops automatically when the device has been adequately filled with distilled water. The W-level status light in the display should now be green, if not press the “Fill water on” button again.
- Page 4 6. Cross-hair adjustment Check that the laser shot is in the centre of the cross-hairs. It can happen that it becomes misaligned through transport. If the shot is centered, skip the next step. If the cross-hairs and the laser shot do not coincide, proceed as follows: Place a suitable object in the centre of the working chamber and focus it.
-
Page 5: Turn Off The Machine
Siro Lasertec. If you have any questions or you´re in need of help, please contact us! We´re there to help you! +49 7231 15413 0 support@siro-lasertec.de We wish you great success and loads of fun with your SL10 laser welding unit!
Need help?
Do you have a question about the SL10 and is the answer not in the manual?
Questions and answers