1. Manuals
  2. Brands
  3. Toolots Manuals
  4. Floor Machine
  5. Driving Sweeper-X3
  6. User manual

Toolots Driving Sweeper-X3 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Driving Sweeper-X3
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Driving Sweeper-X3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Toolots Driving Sweeper-X3

  • Page 1 Driving Sweeper-X3 User Manual...

  • Page 2: Table Of Contents

    Content 1、 PRODUCT PARAMETERS..................2、IMPORTANT SAFETY NOTES................3、BASIC DESCRIPTIONS.................... 4 、 BASIC OPERATIONS....................5 、 MAINTENANCE....................6 、 TROUBLESHOOTING..................7 、 ROUTINE MAINTENANCE................8 、 STORAGE INSTRUCTIONS................. 9、 CIRCUIT DIAGRAM.....................

  • Page 3: Product Parameters

    Part 1-Product Parameters Item Value Unit Note Sweeping Width 1350 Work Efficiency Climbing Ability >15% Main Brush Length Storage Battery 4*12V 80Ah Working hours Continuous different for different Working Time temperatures working conditions. Dustbin Capacity Side Brush Diameter Driving Power (Motor) Operating Power Main...

  • Page 4: 2、Important Safety Notes

    Part 2-Important Safety Notes ★ Unplug the battery wiring and charger plug before repairing the machine. ★ Never use the broken power line to charge the battery. Do not modify the plug. ★ If the power line of the charger is damaged or broken, it must be replaced by the manufacturer or its maintenance agent or personnel with the same qualification to avoid danger.
  • Page 5 Part 2-Important Safety Notes -Make sure all safety devices are in place and work normally. -Check whether the brakes and steering devices work normally. -Adjust the seat and fasten the seat belt (if equipped). 3. When using the machine: -Only use according to the instructions in this manual. -Use the brakes to stop the machine.
  • Page 6 Part 2-Important Safety Notes 4. Before leaving or repairing the machine: -Park the machine on a horizontal surface. -Turn off the machine and take down the key. 5. When repairing the machine: -All work must be carried out in an environment with good lighting conditions and high visibility.
  • Page 7 Part 2-Important Safety Notes -When the charger is running, do not unplug the DC power line of the charger from the socket of the machine. Arc discharge may occur. If it is necessary to suspend charging during charging, please unplug the AC power line first. -Avoid contact with battery acid.

  • Page 8: 3、Basic Descriptions

    Part 3-Basic Descriptions 1. Components of Machine...
  • Page 9 Part 3-Basic Descriptions...
  • Page 10 Part 3-Basic Descriptions Figure Descriptions of Components Seat Water Tank Service Side Door Rear Wheel Steering Control Dashboard Chassis Sprinkler Head Caution Light Tank Cap Pedal for Large Garbage Operation Panel Collection Brake Pedal Accelerator Pedal Front Wheel Right Brush Headlight Left Brush Main Brush...
  • Page 11 Part 3-Basic Descriptions 2、Dashboard Panel Figure Descriptions of Dashboard Panel Head Light Switch Sprinkling Switch Dust Shocking Switch Forward/Backward Switch Coulombmeter Horn Switch Key Switch Sweeping Switch...

  • Page 12: Basic Operations

    Part 4-Basic Operations 1、Precautions Before Operating the Machine Before sweeping, pick up wires, ribbons, strings, large pieces of wood or other things that may be entangled or caught in the brush. Drive as straight as possible. Avoid hitting the column or scratching the side of the machine.
  • Page 13 Part 4-Basic Operations 2. Check before operating the machine. 1. Check if there is liquid leakage. 2. Empty the dustbin and clean the filter. 3.Check whether the main brush is damaged or worn. Remove the entanglements on the main brush. 4.Check whether the side brush is damaged or worn.
  • Page 14 Part 4-Basic Operations 3. Driving Operation 1. Insert the key into the key switch and turn the key to the ON position. 2. Move the seat adjustment handle, pull the seat back and forth, and adjust the seat to a suitable driving position. 3.
  • Page 15 Part 4-Basic Operations 7. When turning, turn the steering wheel in the corresponding direction. Note: Pay attention to pedestrians, vehicles and obstacles before turning, and do not turn until it is safe. 8. When pedestrians, vehicles, etc. are in front, press the horn switch to remind pedestrians and vehicles in front to avoid collision.
  • Page 16 Part 4-Basic Operations 第四部分 基本操作 4. Sweeping Operation 1. Perform Steps 1-4 in driving operation. 2. Turn the sweeping switch to the sweeping state. 3. Wait for the main brush and the side brush to all lower, and carry out sweeping after they touch the ground.
  • Page 17 Part 4-Basic Operations 7. When the dust on the ground is relatively large, turn on the sprinkling switch on the panel to activate the sprinkling function. 8. When the flowing dust in the cleaning process is relatively large, it is necessary to clean the dust on the filter, and turn on the dust shocking switch on the panel to activate the dust shocking function.
  • Page 18 Part 4-Basic Operations 5. Water Tank Filling Operation Turn water tank cover counterclockwise and screw out the water tank cap. 2. Insert the water injection pipe into the water inlet of the water tank, and open the water valve to add water. 3.
  • Page 19 Part 4-Basic Operations 6、Dustbin Emptying Operation 1. Hold the handle of the dustbin buckle and lift it up to loosen the dustbin buckle. 2. Pull out the dustbin backward, separate the dustbin from the machine, and dump the garbage into the garbage collection site.
  • Page 20 Part 4-Basic Operations 7、Charging Operation 1. Open the protective cover of the charging port, insert the charger plug, connect the charger to the AC power supply, and start charging. 2. When the indicator light on the charger turns from red to green, it means that the electricity is fully charged, and then disconnect the charger.

  • Page 21: Maintenance

    Part 5-Maintenance 1、Adjust the height limit of side brush 1. Take out the dustbin. 2. Fasten the lower edge of the water tank as indicated by the arrow, and open the water tank. 3. Clip the limit lever into the slot. 4.
  • Page 22 Part 5-Maintenance 2、Adjust the height limit of the main brush 1. Turn the sweeping switch to the sweeping state, wait for the side brush to reach the lowest point, and turn off the key switch. 2. Unscrew the star-shape handle in the direction indicated by the arrow.
  • Page 23 Part 5-Maintenance 3、Adjust the height of the rear axle 1. Take out the dustbin. 2. Fasten the lower edge of the water tank as indicated by the arrow, and open the water tank. 3. Clip the limit lever into the slot. 4.
  • Page 24 Part 5-Maintenance 4、Adjust the height of main brush motor 1. Take out the dustbin. 2. Fasten the lower edge of the water tank as indicated by the arrow, and open the water tank. 3. Clip the limit lever into the slot. 4.
  • Page 25 Part 5-Maintenance 5、Adjust the tension wheel of the main brush belt 1. Unscrew the star-shaped handle in the direction indicated by the arrow. 2. Open the service door on the right side. 3. Loosen the lock bolt. Tension- 4. Press down the tension wheel to make wheel the main brush belt have a certain tension.
  • Page 26 Part 5-Maintenance 6、Replace the side brush 1. Loosen the fixing bolt on the connecting flange of the side brush, as shown in the circle. 2. Hold the side brush plate with both hands and press down forcefully to separate the side brush from the motor shaft. 3.
  • Page 27 Part 5-Maintenance 7、Replace the main brush 1. Unscrew the star-shaped handle in the direction indicated by the arrow. 2. Open the service door on the left side. 3. Remove the star-shaped handle on the main brush arm. Main brush arm 4.
  • Page 28 Part 5-Maintenance 8、Replace the filter 1. Take out the dustbin. 2. Unscrew the four star-shaped handles in the direction indicated by the arrow. 3. Hold the handle of the filter cover with both hands and take out the filter assembly. 4.

  • Page 29: Troubleshooting

    Part 6-Troubleshooting Problem Reason Solution The suction fan is off Turn on the suction fan The filter is filter clogged Clean or replace the dust filter The side flap of the main Replace or adjust the side Too much brush and the dust sealing flap dust sealing...

  • Page 30: Routine Maintenance

    Part 7-Routine Maintenance 1. The maintenance of the machine must be operated by professionals, and there should be regular maintenance (during maintenance, the equipment must be stopped; the power switch must be turned off, and the battery wire must be disconnected).

  • Page 31: Storage Instructions

    Part 8-Storage Instructions Please take the following steps if you need to store the machine for a long time. Note: keep the machine away from rain and keep it indoors. Store the machine in a flat and dry place. Do not expose the machine to rain and snow.

  • Page 32: Circuit Diagram

    Part 9-Circuit diagram...

Table of Contents