Subscribe to Our Youtube Channel
Summary of Contents for PLS PEGASUS FLX Series
- Page 1 ® FLeX PEGASUS 12-channel Digital Dimmer/Relay Combination User’s manual Fourth edition Firmware V1.0.6 and above © Copyright 2016...
- Page 2 FLX Digital Dimmer Dear Customer! Thank you for chose PLS Electronics product. If you have any technical question or you looking for other equipments, don’t hesitate to take up the contact with our sales representative or with the manufacturer at the www.pls.hu...
-
Page 3: Front Parts
PLS Kft – www.pls.hu Front parts 1 Phase / Module state indicators. If it’s ON, the corresponding phase unit is working. 2. Circuit breakers to protect the outputs. 3. These yellow LEDs show the RELAY mode. If it is lighting the corresponding channel is in RELAY mode. - Page 4 ® PEGASUS FLX Digital Dimmer On Figure2 and Figure3 you can find the outlet of the backside connectors of the one output per channel versions like FLX-12xx-S (Schuko), FLX-12xx-F (French/Belgian CEBEC), FLX-12xx-C (CEE16/3), FLX-12xx-PC (PowerCon) and FLX-12xx-WL (Wieland ST17) dimmer Figure 2.
-
Page 5: Side Connectors
Output neutrals for channel 1-12 Side connectors PROTECTIVE EARTH (PE) Recommended 24-pole male plug (optionally orderable form PLS): Male insert: HDC HE 24 MT (Tension clamp, Weidmüller order no.: 1745850000) or HDC HE 24 MS (Screw connection, Weidmüller order no.: 1211100000) House: HDC 24B TOBU 1M25G (M25 cable gland Weidmüller order no.: 1787820000) - Page 6 ® PEGASUS FLX Digital Dimmer Outlet of the backside connectors of the FLX-12xx-H2 and FLX-12xx-H2D dimmer: Figure 5. Back part connectors (2x16-pole ‘Harting/ILME’ type) 1. Outputs for the channels 1 to 6. This connector referred in the future as SocketA. 2.
- Page 7 PLS Kft – www.pls.hu Recommended 16-pole male plug (optionally orderable form PLS): Male insert: HDC HE 16 MT (Tension clamp, Weidmüller order no.: 1745840000) or HDC HE 24 MS (Screw connection, Weidmüller order no.: 1207500000) House: HDC 16B TOBU 1M25G (M25 cable gland Weidmüller order no.: 1788210000) Outlet of the backside connectors at FLX-12xx-SX dimmer: Figure 6.
- Page 8 ® PEGASUS FLX Digital Dimmer Outlet of the backside connectors at FLX-12xx-STB dimmer: Figure 7. Back part connectors (Screw terminal block input/outputs) 1. Outputs for the channels 1 to 6. Max wire cross section is 4mm 2. Outputs for the channels 7 to 12. Max wire cross section is 4mm 3.
- Page 9 PLS Kft – www.pls.hu CAUTION! The apparatus is NOT waterproof! Protect it from liquids! Not to use outdoors without appropriate preventive measures. If water or other liquid getting into it, dry up, and take to technician! Working with wet apparatus is PERILOUS!
-
Page 10: Digital Control
® PEGASUS FLX Digital Dimmer 3. Analog control (optional) The functions of the SUB-D connector pins are in the following table: The Pin 13 is an optional fix 10V ( Pin N° Function =50mA!) output. With this output and twelve OMAX 1-12 1-12 Channel IN... - Page 11 PLS Kft – www.pls.hu 4.2 Menu specification After pressing the SET button on the dimmer you can reach the following menu points (use UP/DOWN keys to scroll on the menu list) 1. Start Address 2. Test Outputs 3. Run Chaser 4.
- Page 12 ® PEGASUS FLX Digital Dimmer 4.2.3. Chaser The dimmer has 9 preprogrammed (non-modify able) scenes / chaser effects. After enter to this menu, select with the UP/DOWN keys which chaser you want to play on the output. The first three are fix light outputs (30%, 60% and 100%) for each channel; the last 6 are running chasers. Press SET after selection and the chaser now present on the outputs.
- Page 13 PLS Kft – www.pls.hu 4.2.7. Dimmer Curves To select different control curves for each output, enter into this menu point. With the UP/DOWN keys select the output (1-12 or ALL) and after press SET. Now you can set the control curve by the UP/DOWN keys. A star (*) indicated next to the level that the data has been changed.
- Page 14 ® PEGASUS FLX Digital Dimmer 4.2.8.3. Record Memories With this feature you can store DMX data into the memory. Use the UP/DOWN keys to select memory location where you want to save the DMX input and press SET. If the selected memory location is not empty the dimmer prompt you that the location is contain stored data.
-
Page 15: Technical Information
PLS Kft – www.pls.hu 4.2.11. Dimmer Settings By pressing the SET button three times within two seconds you enter into the dimmer setting menu point where you can adjust the following preferences: 1. User Control Curve For each DMX input data (0-255) you can set output level (from 0%-100%) to give freedom for special control cases. -
Page 16: Declaration Of Conformity
Declaration of Conformity We, PLS Electronics Limited declare under sole responsibility that the product: Product name: .......... Pegasus ® FLX 12-channel dimmer series Product model (output variations):.... S (Schuko), C (12 x 3 pole 16A CEE) F (CEBEC), PC (12 x PowerCon) H1 (24-pole ’Harting’), 2H1 (2x24-pole ’Harting’)
Need help?
Do you have a question about the PEGASUS FLX Series and is the answer not in the manual?
Questions and answers