Ausgang: 26V • Achten Sie darauf, dass Sie nicht mit Lieferumfang (Abb. A) den Fingern, Haaren oder Kleidung in 1 x E-Finne (1) mit Akku inkl. Herstellungsdatum (Monat/Jahr): den Propeller (1b) oder sonstige be- Kontaktpunkt E-Finne (1a) 01/2024 wegliche Teile gelangen.
Sie Paddel mitführen, da zur Stolperfalle werden. ausgesetzt gewesen, lagern Sie diesen Sie ansonsten den Artikel nicht ausrei- • Achten Sie darauf, dass die E-Finne/die für die nächsten 30 Minuten an einem chend manövrieren können. Adapterplatte immer korrekt und fest im sehr sicheren Ort (z. B.
Page 5
4. Stecken Sie die nun verbundenen Ge- Schraube. Paddelhalterung zusammengedrückt häuseteile aufeinander und verbinden 5. Schieben Sie die E-Finne (1) in die Ad- und ziehen Sie die Fernbedienung von diese mit der Schraube (e). apterplatte und sichern Sie sie mit dem der Paddelhalterung.
Page 6
4. Drücken Sie abschließend die Taste E-Finne ein-/ausschalten „Play“ und die Fernbedienung ist ver- 2 LEDs < 50 % Akku bunden. • Die E-Finne (1) schaltet sich ein, wenn 3 LEDs < 70 % Akku sie mit dem Kontaktpunkt (1a) vollstän- Methode 2 4 LEDs <...
Zudem sind Vertreiber von werden. zerbrechliche Teile wie Schalter oder Teile, Elektro- und Elektronikgeräten zur E-Finne: Nach jedem Gebrauch mit Leitungswas- die aus Glas gefertigt sind. Rücknahme verpflichtet. Rückgabe und ser abspülen und anschließend trockenwischen. Ansprüche aus dieser Garantie sind aus- Entsorgung sind für Sie kostenfrei.
(1a) ted risks. Children must not be allowed propeller (1b) F2 Fun & Function hereby declares that to play with the product. Cleaning and antenna cable (1c) this product meets the following...
Page 9
• Familiarise yourself with the body of the product and the guarantee will no ble overheating. water before paddling. longer be valid. • Only charge the battery at an ambient • Before using the product, always make • Keep the product, the battery charger temperature of 0–45°C.
Page 11
Preparation (Fig. B) Assembly (Fig. C–G) Attaching the antenna to the SUP board (Fig. E) Note: the product is not compatible with 1. Attach the fastener (1g) to a suitable Cover (a) carbon-reinforced SUP boards and sink- place on your SUP board (e.g. on the Propeller (b) ers, as this can lead to radio interference.
Page 12
Turning the remote control on Overview remote control Automatic mode and off (Fig. H) Note: in this mode, the product supports • Press and hold the “Play” button (3d) you with every paddle stroke. for approx. three seconds to switch • Press and hold the “–” button (3c) for on the remote control (3).
The product was produced with great care complies with Directive Storage, cleaning and under continuous quality control. F2 2012/19/EU. This directive Fun & Function GmbH gives private end When not in use, always store the product...
Page 15
F2 FUN & FUNCTION GMBH SCHLEIZER STRASSE 105 DE-95028 HOF / SAALE • GERMANY PHONE: (+49) 9281 84009 66 E-MAIL: info@f2boards.com WWW.F2BOARDS.COM 01/2024 MODEL NO.: 803714 EAN 4065997034915...
Need help?
Do you have a question about the E-FINNE and is the answer not in the manual?
Questions and answers