Cleaning the pump Checking the water inlet hose Precautions and tips, 7 General safety Disposal Description of the washing machine, 8-9 WMAOD 844 Control panel Display Running a wash cycle, 10 Wash cycles and functions, 11 Table of wash cycles...
Installation ! Keep this instruction manual in a safe place ning the adjustable front feet (see figure); the for future reference. Should the appliance be angle of inclination, measured according to the worktop, must not exceed 2°. sold, transferred or moved, make sure the Levelling your appliance correctly will provide instruction manual accompanies the washing it with stability and avoid any vibrations, noise...
Page 3
Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without ben- • the socket is compatible with the washing ding it, to a draining machine’s plug.
As the colours of the wires in the lead may not ! The power supply cable must only be repla- correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &...
Technical data Model WMAOD 844 width 59.5 cm Dimensions height 85 cm depth 60.5 cm Capacity from 1 to 8 kg please refer to the technical Electrical data plate fixed to the ma- connections chine maximum pressure 1 MPa (10 bar)
Care and maintenance Cutting off the water and electri- Caring for the door and drum of city supplies your appliance • Turn off the water tap after every wash cycle. • Always leave the porthole door ajar in order This will limit wear on the hydraulic system in- to prevent unpleasant odours from forming.
Precautions and tips This washing machine was designed and constructed in accordance with international safety regulations. The fol- lowing information is provided for safety reasons and must therefore be read carefully. General safety • This appliance was designed for domestic use only. This appliance can be used by children aged •...
Description of the washing machine Control panel CLEANING SPIN ON/OFF ACTION button button button DISPLAY START/PAUSE button with WASH CYCLE FUNCTION indicator light CYCLE button Detergent dispenser drawer buttons SELECTOR buttons DELAY TEMPERATURE button button ANTI ALLERGY CHILD LOCK RINSE button button TEMPERATURE button: press to decrease the tempera-...
Page 9
Display The display is useful when programming the machine and provides a great deal of information. The two upper strings A and B provide details of the wash cycle selected, the wash cycle phase in progress and all informa- tion relating to the progress status of the wash cycle. String C shows the time remaining until the end of the wash cycle in progress and, if a DELAYED START has been set, the time remaining until the start of the selected wash cycle.
Running a wash cycle 1. SWITCH THE MACHINE ON. Press the On/Off “Delicate” level is reached. The cycle will reduce the button ; the text POWER ON will appear on the drum rotation to ensure washing results are perfect for display and the START/PAUSE indicator light will flash delicate garments.
Wash cycles and functions Table of wash cycles Detergents Max. Description of the wash cycle temp. (°C) STANDARD 60° Whites: heavily soiled whites and delicate colours. (Max. 90°) 1400 Cotton (Cottons) (1st press of the button) (3): heavily soiled whites and delicate 40°...
Detergents and laundry Detergent dispenser drawer Anti Stain Quick: this programme is ideal for washing the most difficult daily stains in 1 hour. It is ideal for mixed Good washing results also depend on the correct dose of fabrics and coloured garments, caring for your clothes as detergent: adding too much detergent will not necessarily it washes.
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. •...
Page 14
The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher SPIN s - This will increase the programme time accordingly.
Product Guarantee and Repair Information Guarantee Recycling and Disposal Information As part of Hotpoint’s continued commitment to 12 Months Parts and Labour Guarantee helping the environment, Hotpoint reserves the right Your appliance has the benefit of our manufacturer’s to use quality, recycled components to keep down guarantee, which covers the cost of breakdown customer costs and minimise material wastage.
Page 16
195156255.00 04/2017 Whirlpool EMEA S.p.A. - Socio Unico via Carlo Pisacane n.1, 20016 Pero (MI) Italy www.hotpoint.co.uk...
Need help?
Do you have a question about the WMAOD 844 and is the answer not in the manual?
Questions and answers