Type-C Charging Cable PrinCube Manual Basic Operation Install cartridge 1. Remove the protective case and protective film on the ink cartridge; 2. Remove the printer base and pull the toggle switch to ‘OPEN’ , then open the transparent cover; 3. Put the cartridge into the printer's ink tank, making sure that it’s fully secured. Close the transparent cover and pull the toggle switch to ‘LOCK’...
app. Notes: The address is only accessible when WiFi or USB is connected to the PrinCube network. If the Android system cannot access the address normally, please turn off the automatic network switching function, and ignore or select ‘No’ when popping up the notification of using the mobile network.
5. Click the default crop box shown in the edit area, adjust the crop box to fit the desired pattern area. 6. Click ‘Print’ to send the pattern to the printer. Button Operation and Status Indication 5 seconds after power-on, it enters the ready state, followed by one beep, and the white lights in the middle and both sides are on;...
Page 5
In the Crop mode, you can add multiple crop boxes for multiple-line print. (Each box for one line printing.) When you are done with the pattern editing and cropping, press the button for the first line printing. Move the printer to the next line and press the button again for second-line printing.
Need help?
Do you have a question about the MBrush and is the answer not in the manual?
Questions and answers
اسم الشريكة المصنعة