Canford 11-331 Technical Data

12
Designed by Canford, these 20U high racks are manufactured from laminated particle board, and are supplied
"flat packed "complete with all necessary fittings, including rack strip, castor set and assembly instructions.
Standard finishes are light grey (to match the Canford self-assembly technical furniture) or maple laminate.
Suitable for the tidy organisation of most items of standard rack-mounting audio equipment, in studios, offices
and control rooms, as a lower cost alternative to the hardwood version, the rack has a slightly raked face, with
sides pre-machined to take the fully punched rack strip and inset handles. The hinged rear door is constructed in
one piece, with provision for cable access and door handle. At the base of the rack is a plinth, with "kick strip "
concealing four heavy-duty castors.
Suitable cage nuts are type 16-026.
Manufactured for Canford Audio.
Technical Specification:
Dimensions: 600 x 525 x 1100mm overall
Weight: 36kg
Tools required for assembly:
Posidrive/Supadrive style screwdriver, No.2 point, for screw assemblies.
Posidrive/Supadrive style screwdriver, No.3 point, for bolt assemblies.
Soft hammer or mallet.
Bradawl.
Parts list:
Item
1 TOP
2 BACK RAIL
3 SIDE PANELS
4 WHEEL BASE / CASTORS
5 DOOR
6 CARCASS BOLTS
7 BOLT COVERS
8 WORKTOP FIXING BRACKETS
9 HINGE
10 HINGE MOUNTING PLATE
11 DOOR BUFFER
12 WOODSCREW No. 8 x 32 mm
13 WOODSCREW No. 8 x 16 mm
14 WOODSCREW No. 6 x 12 mm
15 RACKMOUNT ANGLE STRIPS
Construction:
Unpack and check items against parts list.
Should there be any discrepancies, please contact our Sales Department on 0191 418 1122.
02-081 (Issue 3) 01/02
CANFORD AUDIO PLC
CROWTHER ROAD, WASHINGTON
TYNE & WEAR, NE38 0BW. UK
Admin 0191 418 1000
Sales 0191 418 1122
Fax 0191 418 1001
11-331 Canford Self Assembly Rack Trolley - Grey
11-332 Canford Self Assembly Rack Trolley - Maple
technical data
Quantity
1 off
1 off
2 off
1 off
1 off
20 off
20 off
9 off
2 off
2 off
2 off
9 off
8 off
8 off
2 off